" GTO"....... stands for : " extra money for Gas, Tires and Oil." ( My Dad's saying ).
Fifty to eighty dollars, industrially priced at retail, a POP, is well worth it, for what it does, that NO OTHER caps we have had, can do for the music !! This IS the future before our noses, from all I have heard of it.
BUT, the eBay seller has them offered now in a 50 piece lot of 5.0 uFs, for what ...$205 dollars, plus shipping, less than ten cents on the dollar.
Low Ohms.....Jeff Medwin
I have a friend, who in 2016 has compared the 10 uF RIFA to the 5 uF ARCOTRONICS 1200 VDC part we were using, and he prefers the latter 5 uF part.
I have not A-Bed them.
- - - Updated - - -
Here you are :
5uF 1200V MKP Filter Caps GTO LOW ESR HQ arcotronics 1pc | eBay
As I previously reported, 1 to up to 5 or, 1 to up to 13 pieces, can come to the USA for a FLAT shipping cost.
Get a few extra, because eventually they have to be bought retail, as in WIMA GTOs from Mouser, and they are $50 to $80 each. When you use them as a bypass C in one spot, you will ( hopefully ) THINK to use them in another appropriate circuit location ( amps and crossovers !! ).
I like to have them all through the chain, after my 5U4GB rectifier tube, across C1 and C2 feeding the 2A3 Finals. And, two in each DIY 12 dB two way VOTT crossover, a 5 uF bypass cap, as part of the total "C" or uFs, in any critical position. I have done this, with fabulous result, since 4-2016, in my two-stage DC amps and in my 12dB VOTT A7-800 crossovers.
1,500 A. peak-instantaneous-capable in a "C" location, ( which we NEVER have had before in audio ) GETS the LEADING EDGE, of all music transients !!
Have fun. Tauratronics, the gentlemen eBay seller is named John Joosse, Netherlands...is a very good guy !! I THINK these ARCOTRONICS 5's, and other types, came into his hands as a result of KEMET buying that company...a guess.
Jeff Medwin .... Low Ohms
Last edited by LowOhms; July 17th, 2017 at 10:39 AM.
[QUOTE=GM;1973607]Which were?
GM
GE and several other American brands bought surplus. The PIO replaced Solens which I found to have a grainy texture to the sound, if that makes any sense.
Cheers
[QUOTE=LowOhms;1973704]I have a friend, who in 2016 has compared the 10 uF RIFA to the 5 uF ARCOTRONICS 1200 VDC part we were using, and he prefers the latter 5 uF part.
I have not A-Bed them.
- - - Updated - - -
So your friend compared a 10 uF cap to a 5 uF cap. How did he do that?
[QUOTE=Boli46;1973710]I do not know for sure. It was in his own design of a SE amp.
I am JUST GUESSING .... likely as a power supply bypass, one of a number of multiple caps, each successively smaller in uFs. The 10 uF or the 5 uF would likely be the " second " cap in the bundle, after a higher uF WIMA DC LINK main cap, and there may be four to seven smaller caps in parallel, for higher frequencies, as part of the bundle.
But do not take his word on this, and I am only guessing how he did testing. If you have the time, A-B them for yourselves and decide what YOU like the best. Use your system.
Regards,
Jeff Medwin
Last edited by LowOhms; July 17th, 2017 at 02:24 PM.
[QUOTE=LowOhms;1973717]
So you're just guessing. Right. Perhaps you should wait until you are better informed before you spread your "wisdom" on this forum. Anyway, a comparison between a 10 uF cap and a 5 uF cap doesn't seem very useful to me.
I have ordered a fair number of the 5 uF Arcotronics and a few 2 uF Rifa PHG491 caps, but I will certainly not waste my time comparing them.
Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.
Your neighbors called. They like your music.
Bookmarks