Results 1 to 8 of 8

Thread: 604G with coated cone F/S in Tampa, FL

  1. #1
    Senior Hostboard Member Elitopus1's Avatar
    Join Date
    June 26th, 2015
    Location
    Upstate NY
    Posts
    1,037
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    7 Post(s)

    604G with coated cone F/S in Tampa, FL

    I swear I’ve seen this speaker for sale before. 604G with a plastic coating on the cone. Seller says it helps protect against the humidity. Hmm.

    He is selling is with a Valencia crossover and some other Altec crossover. Interesting.

    500$

    Altec 604-8GAltec Lansing Professional Co-Ax Speaker - electronics - by owner - sale

  2. #2
    Senior Hostboard Member
    604G with coated cone F/S in Tampa, FL


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,330
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    56 Post(s)

    Re: 604G with coated cone F/S in Tampa, FL

    Only an idiot would do that.
    Not sure if that is even an Altec cone.

    Probably worth the price as a core for rebuilding.
    Your neighbors called. They like your music.

  3. #3
    Senior Hostboard Member Elitopus1's Avatar
    Join Date
    June 26th, 2015
    Location
    Upstate NY
    Posts
    1,037
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    7 Post(s)

    Re: 604G with coated cone F/S in Tampa, FL

    I think I saw this same 604 for sale a couple years ago. If I remember correctly it was mentioned in a thread on AudioKarma.
    I agree it’s probably just a good core at this point. And right, maybe they ruined a recone instead of an original.

    I have read about people coating cones with a glue and water mixture. It’s supposed to lower the Fs right?

    Also, don’t speakers that are used outside sometimes get their woofers coated? I could see if a speaker lived outside in FL the humidity would get to it.

    I had a pair of 421a woofers that were wavy as hell. The cones were also super sun bleached. They were a light brown. But they still worked and didn’t have an VC rub.
    Last edited by Elitopus1; January 21st, 2020 at 03:52 PM.

  4. #4
    Senior Hostboard Member GM's Avatar
    Join Date
    December 26th, 2002
    Location
    Chamblee, Ga.
    Posts
    4,930
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    43 Post(s)

    Re: 604G with coated cone F/S in Tampa, FL

    Quote Originally Posted by Elitopus1 View Post
    I swear I’ve seen this speaker for sale before. 604G with a plastic coating on the cone. Seller says it helps protect against the humidity. Hmm.

    Quote Originally Posted by Elitopus1 View Post
    I have read about people coating cones with a glue and water mixture. It’s supposed to lower the Fs right?

    Also, don’t speakers that are used outside sometimes get their woofers coated?


    It does.

    Yes, Fs, Qms decrease and Qes, Qts increase: Thiele Small parameters equations - How each one affects the others

    Water based glue, etc., coatings, shellac, Dammar are popular with DIYers for damping inexpensive 'wide/full' range drivers. For lowering Fs, some type of weight is normally added.

    Yes, if made from paper and not otherwise pre-treated.

    All we did for the tropics, etc., was with the dirty amber colored goop you see on electrical components, transformer windings insulation thinned down as required. Really nasty stuff to work with.

    GM
    Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

  5. #5
    Senior Hostboard Member Elitopus1's Avatar
    Join Date
    June 26th, 2015
    Location
    Upstate NY
    Posts
    1,037
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    7 Post(s)

    Re: 604G with coated cone F/S in Tampa, FL

    GM: Have you ever seen a 604 treated like this? Seems like the Fs is already a decent number with these.

  6. #6
    Senior Hostboard Member bowtie427ss's Avatar
    Join Date
    July 24th, 2006
    Location
    Rural NY
    Posts
    3,884
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    22 Post(s)

    Re: 604G with coated cone F/S in Tampa, FL

    Why is there a pic of the cone un-treated, are we supposed to hear the difference in the ad?

    Why doesn't he identify the period correct crossover chassis?

    Hopefully, it wasn't driven too hard using that B Valencia network.

    I agree with OG's theme, offer to buy it as a re-buildable core and let the surprises all be pleasant ones.
    Not all vegetables make good leaders.

  7. #7
    Senior Hostboard Member Elitopus1's Avatar
    Join Date
    June 26th, 2015
    Location
    Upstate NY
    Posts
    1,037
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    7 Post(s)

    Re: 604G with coated cone F/S in Tampa, FL

    What are 604G cores going for nowadays? I paid around 300$ each for my Urei 604G drivers with good (but aftermarket) cones. But maybe they were cheaper because they have the Urei horn and not the Altec....

    I didn’t see any completed sales for 604G in need on a recone on the bay.

    I figure if he came down to 400$, then it’s 150ish$ to recone, plus 100$ shipping round trip. So that’s 650$ but doesn’t address the HF diaphragm. Who knows what’s in there now and what the guy did to it.

    - - - Updated - - -

    Also the guy talks about his cabinet having two sections connnected by a 2? tube. But his cabinet drawing seems to show a normal configuration of the cabinet (one big box).

    It seems like the 2? tube wouldn?t be big enough to let the air move between the upper and lower cabinet...
    Last edited by Elitopus1; January 22nd, 2020 at 10:11 AM.

  8. #8
    Senior Hostboard Member GM's Avatar
    Join Date
    December 26th, 2002
    Location
    Chamblee, Ga.
    Posts
    4,930
    Follows
    0
    Following
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    43 Post(s)

    Re: 604G with coated cone F/S in Tampa, FL

    Quote Originally Posted by Elitopus1 View Post
    GM: Have you ever seen a 604 treated like this? Seems like the Fs is already a decent number with these.
    No, just the shellacking like we did at Eaton/C-H, which barely lowers Fs, which while light by modern standards is still pretty heavy compared to a synthetic coating or two, though [shellac] stiffens them till they sound like dull metal, i.e. very bright like the horn, so a good match if the rest of the system is 'dark', i.e. all the early amps I've been exposed to out of broadcasting, cinema, etc., systems.

    GM
    Loud is Beautiful if it's Clean! As always though, the usual disclaimers apply to this post's contents.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 20820612 times.