http://i.imgur.com/7O0Pp0o.png
Printable View
PrintDevices and Printers Publisher details
Issues found
Windows Update configured to never install driversWindows Update configured to never install drivers
Driver updates aren't automatically installed when detected by Windows Update. Not fixed Not Fixed
Change Windows Update settings Completed
MID4331 doesn't have a driverMID4331 doesn't have a driver
There is no driver installed for MID4331. Detected Detected
Install a driver for this device Completed
Apply solution for driver problem Not run
Problem with PnP devicesProblem with PnP devices
There are problems with some PnP devices. Windows will take additional steps to further troubleshoot these devices. Detected Detected
User initiated troubleshooting on a USB deviceUser initiated troubleshooting on a USB device
Windows has scanned for common USB device problems. Detected Detected
Potential issues that were checked
The USB device might have stopped respondingThe USB device might have stopped responding
If a USB device is not working after the computer wakes, Windows can reset the device each time the computer wakes from sleep. Issue not present
Issues found Detection details
6 Windows Update configured to never install drivers Not fixed Not Fixed
Driver updates aren't automatically installed when detected by Windows Update.
Change Windows Update settings Completed
Change Windows Update settings so that driver updates are downloaded and installed automatically.
6 MID4331 doesn't have a driver Detected Detected
There is no driver installed for MID4331.
InformationalDevice information
Name: MID4331
ID: USB\VID_18D1&PID_0003&MI_01\6&D9E7E77&1&0001
Error code: 28
Install a driver for this device Completed
The driver for MID4331 is not installed. Install the latest driver for the device.
Apply solution for driver problem Not run
Follow the instructions in the solution to address the driver problem.
Problem with PnP devices Detected Detected
There are problems with some PnP devices. Windows will take additional steps to further troubleshoot these devices.
User initiated troubleshooting on a USB device Detected Detected
Windows has scanned for common USB device problems.
Potential issues that were checked Detection details
The USB device might have stopped responding Issue not present
If a USB device is not working after the computer wakes, Windows can reset the device each time the computer wakes from sleep.
Detection details Expand
Collection information
Computer Name: H
Windows Version: 6.3
Architecture: x64
Time: Monday, March 28, 2016 10:22:57 PM
Publisher details Expand
Devices and Printers
Troubleshoot problems with devices and printers.
Package Version: 2.0
Publisher: Microsoft Windows
Devices and Printers
Troubleshoot problems with devices and printers.
Package Version: 1.0
Publisher: Microsoft Corporation
Hardware and Devices
Find and fix problems with devices and hardware.
Package Version: 1.1
Publisher: Microsoft Windows
Windows Network Diagnostics
Detects problems with network connectivity.
Package Version: 1.0
Publisher: Microsoft Windows
Printer
Find and fix problems with printing.
Package Version: 1.0
Publisher: Microsoft Windows
USB
Troubleshoot problems with a USB device
Package Version: 1.0
Publisher: Microsoft Windows
Replies: 21
Views: 1,343
Windows Network Diagnostics Publisher details
Issues found
Problem with wireless adapter or access pointProblem with wireless adapter or access point Detected
Reset the wireless adapter Completed
Investigate router or access point issues Completed
Refer to Windows Help and Support for more information about wireless connectivity problems Completed
Issues found Detection details
6 Problem with wireless adapter or access point Detected
Reset the wireless adapter Completed
Network Diagnostics Log
File Name: 739CECD9-9AE3-4A88-ABEA-F855D719DFDE.Repair.1.etl
Investigate router or access point issues Completed
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. After all the lights on the device are off, wait at least 10 seconds. 3. Turn the device back on or plug it back into the power outlet. To restart a router or access point that has a built-in battery, press and quickly release the Reset button.
Network Diagnostics Log
File Name: 8C9ADDF4-A4E8-489A-953F-D974BBDD53E7.Repair.4.etl
Refer to Windows Help and Support for more information about wireless connectivity problems Completed
Windows cannot resolve your wireless connectivity issue.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6200 AGN
Manufacturer . . . . . . . . . : Intel Corporation
Provider . . . . . . . . . . . : Intel
Version . . . . . . . . . . . : 15.17.0.1
Inf File Name . . . . . . . . . : C:\Windows\INF\oem8.inf
Inf File Date . . . . . . . . . : Monday, May 04, 2015 7:18:10 AM
Section Name . . . . . . . . . : Install_MPCIEX_Dell_6200_AGN_2x2_HMC_WIN7_64_MOW
Hardware ID . . . . . . . . . . : pci\ven_8086&dev_422c&subsys_13218086
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7e6752d9-d01a-49fc-80b4-331ca9833aff
Interface name: Intel(R) Centrino(R) Advanced-N 6200 AGN
Interface type: Native WiFi
Profile: Discovery connection
SSID: Pacific Computers - FREE WIFI
SSID length: 29
Connection mode: Infra
Security: No
Connect even if network is not broadcasting: No
Connection incident diagnosed
Auto Configuration ID: 2
Connection ID: 4
Connection status summary
Connection started at: 2017-02-03 20:29:23-690
Profile match: Success
Pre-Association: Success
Association: Fail
Security and Authentication: Not started
List of visible access point(s): 12 item(s) total, 12 item(s) displayed
BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
-------------------------------------------------------------------------
00-15-C6-5E-E8-A0 Infra g -44 11 McDonalds Free WiFi
00-15-C6-5E-E8-A2 Infra g -46 11 attwifi
00-15-C6-5E-E8-A3 Infra g -45 11 eBOS
C0-7B-BC-2F-8D-25 Infra <unknown> -81 11 Edge-WP@V2yitry2k#$pth1ngsK&nD
DC-7F-A4-25-24-2E Infra <unknown> -71 1 Mac Chevron
38-3B-C8-ED-51-9A Infra <unknown> -64 4 ATT6eAG9Ca
C0-7B-BC-2F-8D-24 Infra <unknown> -82 11 (Unnamed Network)
C0-7B-BC-2F-8D-23 Infra <unknown> -85 11 WiFi, makes life easier!
C0-7B-BC-2F-8D-20 Infra <unknown> -86 11 (Unnamed Network)
C0-7B-BC-2F-8D-22 Infra g -85 11 (Unnamed Network)
00-15-C6-5E-E8-A1 Infra g -46 11 (Unnamed Network)
38-3B-C8-ED-51-A2 Infra <unknown> -70 5765000 ATT6eAG9Ca
Connection History
Information for Auto Configuration ID 3
List of visible networks: 9 item(s) total, 9 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
------------------------------------------------------------------------------
Infra g No 93 Yes McDonalds Free WiFi
Infra g No 90 Yes attwifi
Infra g No 91 Yes eBOS
Infra <unknown> Yes 31 Yes Edge-WP@V2yitry2k#$pth1ngsK&nD
Infra <unknown> Yes 48 Yes Mac Chevron
Infra <unknown> Yes 60 Yes ATT6eAG9Ca
Infra <unknown> Yes 30 Yes (Unnamed Network)
Infra <unknown> No 25 Yes WiFi, makes life easier!
Infra g No 90 Yes (Unnamed Network)
List of preferred networks: 1 item(s)
Profile: Samsung Galaxy On5 8903
SSID: Samsung Galaxy On5 8903
SSID length: 23
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Information for Auto Configuration ID 2
List of visible networks: 0 item(s) total, 0 item(s) displayed
List of preferred networks: 1 item(s)
Profile: Samsung Galaxy On5 8903
SSID: Samsung Galaxy On5 8903
SSID length: 23
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Information for Connection ID 4
Connection started at: 2017-02-03 20:29:23-690
Auto Configuration ID: 2
Profile: Discovery connection
SSID: Pacific Computers - FREE WIFI
SSID length: 29
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Fail 0x00038002
Association reason code: 0x00000002
Information for Connection ID 3
Connection started at: 2017-02-03 20:27:39-668
Auto Configuration ID: 2
Profile: Discovery connection
SSID: eBOS
SSID length: 4
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 00-15-c6-5e-e8-a3
Security and Authentication
Configured security type: Open
Configured encryption type: None
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: No
Multicast key received: No
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 0
Ndis Tx: 0
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 1700
Rx failure: 0
Tx success: 1082
Tx failure: 0
Tx retry: 74
Tx multiple retry: 45
Tx max lifetime exceeded: 0
Tx ACK failure: 133
Roaming history: 1 item(s)
Times: 2017-02-03 20:29:23-681
Roamed from BSSID: 00-00-00-00-00-00
Reason: 0x00000007
Disconnected from BSSID: 00-00-00-00-00-00 Reason: 0x00000101
Information for Auto Configuration ID 1
List of visible networks: 0 item(s) total, 0 item(s) displayed
List of preferred networks: 1 item(s)
Profile: Samsung Galaxy On5 8903
SSID: Samsung Galaxy On5 8903
SSID length: 23
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Information for Connection ID 2
Connection started at: 2017-02-03 20:27:17-471
Auto Configuration ID: 1
Profile: Discovery connection
SSID: OtherNetwork
SSID length: 12
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Fail 0x00038002
Association reason code: 0x00000000
Information for Connection ID 1
Connection started at: 2017-02-03 20:18:29-418
Auto Configuration ID: 1
Profile: Discovery connection
SSID: attwifi
SSID length: 7
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 00-15-c6-5e-e8-a2
Security and Authentication
Configured security type: Open
Configured encryption type: None
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: No
Multicast key received: No
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 0
Ndis Tx: 0
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 1557
Rx failure: 0
Tx success: 949
Tx failure: 0
Tx retry: 21
Tx multiple retry: 5
Tx max lifetime exceeded: 0
Tx ACK failure: 26
Roaming history: 1 item(s)
Times: 2017-02-03 20:27:17-462
Roamed from BSSID: 00-00-00-00-00-00
Reason: 0x00000007
Disconnected from BSSID: 00-00-00-00-00-00 Reason: 0x00000101
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 7e6752d9-d01a-49fc-80b4-331ca9833aff
Interface name: Intel(R) Centrino(R) Advanced-N 6200 AGN
Interface type: Native WiFi
Profile: Discovery connection
SSID: (Unnamed Network)
SSID length: 0
Connection mode: <unknown>
Security: No
Connect even if network is not broadcasting: No
Result of diagnosis: No problem found
Network Diagnostics Log
File Name: 739CECD9-9AE3-4A88-ABEA-F855D719DFDE.Diagnose.0.etl
Other Networking Configuration and Logs
File Name: NetworkConfiguration.cab
Collection information
Computer Name: QQQQ-PC
Windows Version: 6.1
Architecture: amd64
Time: Friday, February 03, 2017 8:29:37 PM
Publisher details
Windows Network Diagnostics
Detects problems with network connectivity.
Package Version: 1.0
Publisher: Microsoft Windows
22 replies | 2064 view(s)
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: delltouchpad.exe
Problem Signature 02: 8.1.0.78
Problem Signature 03: 53423588
Problem Signature 04: Microsoft.VisualBasic
Problem Signature 05: 10.0.0.0
Problem Signature 06: 4ba2183b
Problem Signature 07: 78
Problem Signature 08: 1fc
Problem Signature 09: 34SSPS20BDJ3NJ0WMIT5KAMZHVGLFZCC
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: bb69
Additional Information 2: bb694498ce8e21356267bdd7d9db6a29
Additional Information 3: e5ec
Additional Information 4: e5ec606c383248d751c17e61f36867dc
Read our privacy statement online:
Windows 7 Privacy Statement
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Windows Network Diagnostics Publisher details
Issues found
Your computer appears to be correctly configured, but the device or resource (youtube.com) is not respondingYour computer appears to be correctly configured, but the device or resource (youtube.com) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Issues found Detection details
6 Your computer appears to be correctly configured, but the device or resource (youtube.com) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (youtube.com). The computer or service you are trying to reach might be temporarily unavailable.
Detection details Expand
InformationalDiagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter Wi-Fi 2 driver information:
Description . . . . . . . . . . : Broadcom 802.11n Network Adapter
Manufacturer . . . . . . . . . : Broadcom
Provider . . . . . . . . . . . : Microsoft
Version . . . . . . . . . . . : 6.30.223.256
Inf File Name . . . . . . . . . : C:\Windows\INF\netbc64.inf
Inf File Date . . . . . . . . . : Wednesday, April 11, 2018 11:33:45 PM
Section Name . . . . . . . . . : BCM43XNM_NT63
Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4359
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 1038d43c-9593-4d41-9f92-1d22d47b5b44
Interface name: Broadcom 802.11n Network Adapter
Interface type: Native Wi-Fi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 2
Connection status summary
Connection started at: 2018-12-09 18:30:19-581
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 66 item(s) total, 64 item(s) displayed
BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
-------------------------------------------------------------------------
E2-CB-AC-32-9F-99 Infra <unknown> -63 5240000 swsecure
E6-CB-AC-32-9F-99 Infra a -63 5240000 5ECUR3w3p5TOR3
EA-CB-AC-32-9F-99 Infra <unknown> -63 5240000 WIRELESSNET2
EE-CB-AC-32-9F-99 Infra <unknown> -63 5240000 ALBERTSONS_FREE_WIFI
F2-CB-AC-32-9F-99 Infra <unknown> -63 5240000 digsig
F6-CB-AC-32-9F-99 Infra <unknown> -63 5240000 Ambassador_iPad
E2-CB-AC-32-92-B4 Infra <unknown> -76 5745000 swsecure
E6-CB-AC-32-92-B4 Infra a -76 5745000 5ECUR3w3p5TOR3
E2-CB-AC-32-3B-A4 Infra <unknown> -73 5745000 swsecure
EA-CB-AC-32-92-B4 Infra <unknown> -76 5745000 WIRELESSNET2
E6-CB-AC-32-3B-A4 Infra a -73 5745000 5ECUR3w3p5TOR3
EA-CB-AC-32-3B-A4 Infra <unknown> -73 5745000 WIRELESSNET2
EE-CB-AC-32-92-B4 Infra <unknown> -76 5745000 ALBERTSONS_FREE_WIFI
EE-CB-AC-32-3B-A4 Infra <unknown> -73 5745000 ALBERTSONS_FREE_WIFI
F2-CB-AC-32-92-B4 Infra <unknown> -76 5745000 digsig
F2-CB-AC-32-3B-A4 Infra <unknown> -74 5745000 digsig
F6-CB-AC-32-3B-A4 Infra <unknown> -74 5745000 Ambassador_iPad
F6-CB-AC-32-92-B4 Infra <unknown> -76 5745000 Ambassador_iPad
EE-CB-AC-32-33-4F Infra <unknown> -83 5745000 ALBERTSONS_FREE_WIFI
F2-CB-AC-32-33-4F Infra <unknown> -83 5745000 digsig
F6-CB-AC-32-33-4F Infra <unknown> -83 5745000 Ambassador_iPad
F2-CB-AC-32-B5-74 Infra <unknown> -78 5765000 digsig
F6-CB-AC-32-B5-74 Infra <unknown> -78 5765000 Ambassador_iPad
E6-CB-AC-32-B5-74 Infra a -77 5765000 5ECUR3w3p5TOR3
E2-CB-AC-32-B5-74 Infra <unknown> -79 5765000 swsecure
EA-CB-AC-32-B5-74 Infra <unknown> -79 5765000 WIRELESSNET2
E6-CB-AC-32-AF-C8 Infra a -82 5765000 5ECUR3w3p5TOR3
EE-CB-AC-32-B5-74 Infra <unknown> -78 5765000 ALBERTSONS_FREE_WIFI
EA-CB-AC-32-AF-C8 Infra <unknown> -83 5765000 WIRELESSNET2
EE-CB-AC-32-AF-C8 Infra <unknown> -86 5765000 ALBERTSONS_FREE_WIFI
E2-CB-AC-32-98-DC Infra <unknown> -82 5785000 swsecure
F2-CB-AC-32-98-DC Infra <unknown> -82 5785000 digsig
F6-CB-AC-32-98-DC Infra <unknown> -83 5785000 Ambassador_iPad
E2-CB-AC-32-AF-0C Infra <unknown> -84 5805000 swsecure
E6-CB-AC-32-AF-0C Infra a -85 5805000 5ECUR3w3p5TOR3
EA-CB-AC-32-AF-0C Infra <unknown> -84 5805000 WIRELESSNET2
EE-CB-AC-32-AF-0C Infra <unknown> -86 5805000 ALBERTSONS_FREE_WIFI
E2-CB-AC-32-1E-38 Infra <unknown> -79 5180000 swsecure
E6-CB-AC-32-1E-38 Infra a -80 5180000 5ECUR3w3p5TOR3
EA-CB-AC-32-1E-38 Infra <unknown> -80 5180000 WIRELESSNET2
EE-CB-AC-32-1E-38 Infra <unknown> -80 5180000 ALBERTSONS_FREE_WIFI
F2-CB-AC-32-1E-38 Infra <unknown> -80 5180000 digsig
F6-CB-AC-32-1E-38 Infra <unknown> -80 5180000 Ambassador_iPad
E2-CB-AC-32-AF-8C Infra <unknown> -81 5200000 swsecure
E6-CB-AC-32-AF-8C Infra a -81 5200000 5ECUR3w3p5TOR3
EA-CB-AC-32-AF-8C Infra <unknown> -79 5200000 WIRELESSNET2
EE-CB-AC-32-AF-8C Infra <unknown> -80 5200000 ALBERTSONS_FREE_WIFI
F2-CB-AC-32-AF-8C Infra <unknown> -80 5200000 digsig
F6-CB-AC-32-AF-8C Infra <unknown> -81 5200000 Ambassador_iPad
E2-CB-AC-32-92-63 Infra <unknown> -67 5220000 swsecure
E6-CB-AC-32-92-63 Infra a -67 5220000 5ECUR3w3p5TOR3
EA-CB-AC-32-92-63 Infra <unknown> -67 5220000 WIRELESSNET2
EE-CB-AC-32-92-63 Infra <unknown> -67 5220000 ALBERTSONS_FREE_WIFI
F2-CB-AC-32-92-63 Infra <unknown> -67 5220000 digsig
F6-CB-AC-32-92-63 Infra <unknown> -67 5220000 Ambassador_iPad
FA-CB-BC-32-92-B4 Infra <unknown> -67 1 absauthz
A8-4E-3F-DF-AC-A8 Infra <unknown> -70 1 ROSENTHAL&MARSHLLP
34-68-95-0E-96-BB Infra <unknown> -74 1 HP-Print-bb-LaserJet Pro M201dw
FA-CB-BC-32-9F-99 Infra <unknown> -60 6 absauthz
FA-CB-BC-32-3B-A4 Infra <unknown> -69 6 absauthz
FA-CB-BC-32-AF-8C Infra <unknown> -78 6 absauthz
EE-CB-BC-32-B5-74 Infra <unknown> -72 6 (Unnamed Network)
FA-CB-BC-32-92-63 Infra <unknown> -64 11 absauthz
FA-CB-BC-32-1E-38 Infra <unknown> -75 11 absauthz
Connection History
Information for Auto Configuration ID 1
List of visible networks: 10 item(s) total, 10 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
------------------------------------------------------------------------------
Infra <unknown> Yes 70 Yes swsecure
Infra a Yes 70 Yes 5ECUR3w3p5TOR3
Infra <unknown> Yes 70 Yes WIRELESSNET2
Infra <unknown> No 70 Yes ALBERTSONS_FREE_WIFI
Infra <unknown> Yes 70 Yes digsig
Infra <unknown> Yes 70 Yes Ambassador_iPad
Infra <unknown> Yes 76 Yes absauthz
Infra <unknown> Yes 40 Yes ROSENTHAL&MARSHLLP
Infra <unknown> Yes 32 Yes HP-Print-bb-LaserJet Pro M201dw
Infra <unknown> No 60 Yes (Unnamed Network)
List of preferred networks: 5 item(s)
Profile: pacific commputers
SSID: pacific commputers
SSID length: 18
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028001
Profile: McDonalds Free WiFi
SSID: McDonalds Free WiFi
SSID length: 19
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Profile: ALBERTSONS_FREE_WIFI
SSID: ALBERTSONS_FREE_WIFI
SSID length: 20
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028001
Profile: WholeFoodsMarket
SSID: WholeFoodsMarket
SSID length: 16
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028003
Profile: Pacific Computers - FREE WIFI
SSID: Pacific Computers - FREE WIFI
SSID length: 29
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028001
Information for Connection ID 2
Connection started at: 2018-12-09 18:30:19-581
Auto Configuration ID: 1
Profile: ALBERTSONS_FREE_WIFI
SSID: ALBERTSONS_FREE_WIFI
SSID length: 20
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: ee-cb-ac-32-9f-99
Security and Authentication
Configured security type: Open
Configured encryption type: None
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: No
Multicast key received: No
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 145638
Ndis Tx: 105296
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 1225
Rx failure: 86
Tx success: 723
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Information for Connection ID 1
Connection started at: 2018-12-09 18:30:13-684
Auto Configuration ID: 1
Profile: McDonalds Free WiFi
SSID: McDonalds Free WiFi
SSID length: 19
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware m
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 1038d43c-9593-4d41-9f92-1d22d47b5b44
Interface name: Broadcom 802.11n Network Adapter
Interface type: Native Wi-Fi
Result of diagnosis: There may be problem
InformationalDiagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native Wi-Fi MSM
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 1038d43c-9593-4d41-9f92-1d22d47b5b44
Interface name: Broadcom 802.11n Network Adapter
Interface type: Native Wi-Fi
Profile: ALBERTSONS_FREE_WIFI
SSID: ALBERTSONS_FREE_WIFI
SSID length: 20
Connection mode: Infra
Security: No
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
InformationalNetwork Diagnostics Log
File Name: 28BB3D2A-4F49-4473-883A-9FA36CB8E714.Diagnose.0.etl
InformationalOther Networking Configuration and Logs
File Name: NetworkConfiguration.cab
Collection information
Computer Name: DESKTOP-4EGKR50
Windows Version: 10.0
Architecture: x64
Time: Sunday, December 9, 2018 7:31:52 PM
Publisher details Expand
Windows Network Diagnostics
Detects problems with network connectivity.
Package Version: 4.0
Publisher: Microsoft Windows
[h=Can I have more than one operating system on my computer (multiboot)?]1[/h]__elbasuer__
If your computer's hard disk has adequate free disk space, you can install more than one operating system, and then choose which one to use when you start your computer. This is called a multiboot or dual-boot configuration, and it requires partitions on your hard disk. For more information, see Can I repartition my hard disk?
https://www.hostboard.com/forums/new...reply&t=176207A multiboot disk configuration
[h=Why have more than one operating system?]2[/h]You might decide to create a multiboot configuration if you have programs or devices that only work with older versions of Windows. When you want to use one of those programs or devices, restart your computer and then choose the operating system that you want to use. Multibooting can also be useful for testing programs or devices that work on Windows Vista for compatibility with Windows 7.
[h=How does a multiboot configuration differ from an upgrade?]2[/h]Upgrading replaces your old Windows operating system with a newer version. Setting up a multiboot system installs another operating system alongside your current operating system so that you can use either operating system.
[h=Drawbacks of multibooting]2[/h]Multibooting requires separate partitions on your computer's hard disk for each operating system. If you're running one operating system, you can't run a program installed on another operating system. You'll need to install programs on each operating system that you want to use them in. You must restart your computer each time you want to switch to a different operating system.
You also need to install the oldest operating system first, which can be frustrating if you want to add an earlier operating system (for example, you're currently running Windows 7, but you want to add Windows Vista or Windows XP).
[h=Warning]3[/h]
- Installing an earlier version of Windows after a more recent version is already installed can render your system inoperable. This can happen because earlier versions of Windows do not recognize the startup files used in more recent versions of Windows and can overwrite them. For more information, see Install more than one operating system (multiboot).
- - - Updated - - -
- Replies: 25
- Views: 6,782
Windows : 6.1.7601.65536 (Win32NT)
Common Language Runtime : 4.0.30319.42000
System.Deployment.dll : 4.8.3761.0 built by: NET48REL1
clr.dll : 4.8.4110.0 built by: NET48REL1LAST_B
dfdll.dll : 4.8.3761.0 built by: NET48REL1
SOURCES
Deployment url : https://bingdefaults.blob.core.windo...cation?PC=U377
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of https://bingdefaults.blob.core.windo...cation?PC=U377 resulted in exception. Following failure messages were detected:
+ Access to the path 'C:\Users\DayStreetLab-User\AppData\Local\Temp\Deployment' is denied.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [8/7/2021 4:49:26 AM] : Activation of https://bingdefaults.blob.core.windo...cation?PC=U377 has started.
ERROR DETAILS
Following errors were detected during this operation.
* [8/7/2021 4:49:27 AM] System.UnauthorizedAccessException
- Access to the path 'C:\Users\DayStreetLab-User\AppData\Local\Temp\Deployment' is denied.
- Source: mscorlib
- Stack trace:
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, Object dirSecurityObj, Boolean checkHost)
at System.IO.Directory.InternalCreateDirectoryHelper( String path, Boolean checkHost)
at System.Deployment.Application.SubscriptionStore..c tor(String deployPath, String tempPath, ComponentStoreType storeType)
at System.Deployment.Application.SubscriptionStore.ge t_CurrentUser()
at System.Deployment.Application.ApplicationActivator .PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl, Uri& deploymentUri)
at System.Deployment.Application.ApplicationActivator .PerformDeploymentActivationWithRetry(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatch Info.Throw()
at System.Deployment.Application.ApplicationActivator .PerformDeploymentActivationWithRetry(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator .ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
- 27 replies | 7520 view(s)
Device USB\VID_0080&PID_A001\MSFT30201503310007F was not migrated due to partial or ambiguous match.
Last Device Instance Id: USB\VID_05E3&PID_0732\000000000543
Class Guid: {36fc9e60-c465-11cf-8056-444553540000}
Location Path: PCIROOT(0)#PCI(1D07)#USBROOT(0)#USB(3)
Migration Rank: 0xF000FFFFC0000023
Present: false
Status: 0xC0000719
- - - Updated - - -
Device USB\VID_0080&PID_A001\MSFT30201503310007F was configured.
Driver Name: uaspstor.inf
Class Guid: {4d36e97b-e325-11ce-bfc1-08002be10318}
Driver Date: 06/21/2006
Driver Version: 10.0.18362.387
Driver Provider: Microsoft
Driver Section: UASPort_Install_Control
Driver Rank: 0xFF2000
Matching Device Id: USB\Class_08&SubClass_06&Prot_62
Outranked Drivers:
Device Updated: false
Parent Device: USB\ROOT_HUB20\4&f09b4ad&0
- - - Updated - - -
- Search the community and support articles
- Windows Insider Preview
- Windows Insider Program
- Search Community member
WA
WallyGator_854
Created on August 2, 2015
[h=Using Scsi attached storage (uaspstor.sys) is causing BSOD & system hangs.]1[/h]After upgrading to windows10 from windows 7 my Lacie d2 Quadra external harddisk is not functionning properly.
The drive is properly recognized.
chkdsk doesn't report any errors.
As soon as you start writing/reading from it UASPSTOR reset warnings (Event 129) and IO operation retries (Event 153)
start appearing in de system log destabilizing the complete system.
I upgraded the bios and other drivers => No luck.
I only experience the problem with usb3.0 capable drives not with usb2.0 drives on the same port.
(My system is a Dell T7400 workstation which doesn't have usb3.0 ports. So the drives are attached to usb2.0 ports.)
So my guess is scsi attached storage driver is not functioning properly on my system (uaspstor.sys) and would like to
like to revert to usbstor.sys used in windows7 and still used by default in windows10 if it detects a usb2.0 drive.
Is there a way to get windows to chose the older usb 2.0 driver over the newer one? I am quite sure that will resolve the
problem i have.
This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread.
I have the same question (49)
Subscribe
|
Report abuse
WA
WallyGator_854
Created on August 2, 2015
[h=Using Scsi attached storage (uaspstor.sys) is causing BSOD & system hangs.]1[/h]After upgrading to windows10 from windows 7 my Lacie d2 Quadra external harddisk is not functionning properly.
The drive is properly recognized.
chkdsk doesn't report any errors.
As soon as you start writing/reading from it UASPSTOR reset warnings (Event 129) and IO operation retries (Event 153)
start appearing in de system log destabilizing the complete system.
I upgraded the bios and other drivers => No luck.
I only experience the problem with usb3.0 capable drives not with usb2.0 drives on the same port.
(My system is a Dell T7400 workstation which doesn't have usb3.0 ports. So the drives are attached to usb2.0 ports.)
So my guess is scsi attached storage driver is not functioning properly on my system (uaspstor.sys) and would like to
like to revert to usbstor.sys used in windows7 and still used by default in windows10 if it detects a usb2.0 drive.
Is there a way to get windows to chose the older usb 2.0 driver over the newer one? I am quite sure that will resolve the
problem i have.
This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread.
I have the same question (49)
Subscribe
|
Report abuse
[h=Replies (14) ]2[/h]
Next
https://answersstaticfilecdnv2.azure...arRnd32x32.png
A. User
Replied on August 2, 2015
Hi Wally,
Thank you for being a part of Windows 10 Insider Preview.
I appreciate you for providing details about the issue and we are glad to assist you.
I suggest you plug in your USB 2.0 and run the hardware device troubleshooter and check if it helps.
Follow the below steps:
1. Type troubleshooting in the search bar.
2. Select Troubleshooting.
3. Select View all on the top left corner.
4. Click on Hardware and Devices.
5. Follow the on-screen instructions to run the troubleshooter.
Reference: Refer to the following Microsoft article on Install USB 3.0 and other USB devices.
http://windows.microsoft.com/en-US/windows-8/install-usb-3-usb-devices
Kindly let us know if you need any further assistance with Windows. We are glad to assist you.
Thank you.
Report abuse
1 person found this reply helpful
· Was this reply helpful?
Yes No
WA
WallyGator_854
Replied on August 2, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to A. User's post on August 2, 2015
Thx for looking in to this.
I have been trying a few things out meanwhile.
Uninstalled all drivers & rebooted. Reinstalled them => problem remains.
Tried disabling the uaspstor.sys driver =>the drive not being recognized.
Tried out other drives.
Only the ones ones which are usb3.0 capable have the problem.
I had a Lacie d2 quadra 3TB usb 3.0 : same problem
The lacie d2 quadra 2TB usb2.0 : works fine
All possible tumbdrives work as well (all 2.0) .
Funny that the drives with uas support on the box are the ones ending up not working.
Report abuse
Was this reply helpful?
Yes No
V
**** Van Dyke
Replied on August 6, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to WallyGator_854's post on August 2, 2015
I have the same issue. Event 129, UASPStor
Reset to device, \Device\RaidPort3, was issued.
Reset to device, \Device\RaidPort2, was issued.
Every 5 minutes.
Report abuse
2 people found this reply helpful
· Was this reply helpful?
Yes No
WA
WallyGator_854
Replied on August 7, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to A. User's post on August 2, 2015
Ran the troubleshooter. But no problems were detected and or fixed.
I also installed the latest Patch bundle yesterday (KB3081424) but the problem persists.
The drive is still detected comes online but once you start putting a bit of load on it it goes haywire
with continues resets and you have to litterly pull the plug to unlock you're system.
I imagine this can't be good for the drive. Just hope i doesn't get corrupt.
Also noticed that if you just turn the drive on after a while the following critical error starts appearing
The device Movies5 (location (unknown)) is offline due to a user-mode driver crash. Windows will attempt to restart the device 1 more times. Please contact the device manufacturer for more information about this problem.
Report abuse
Was this reply helpful?
Yes No
WA
WallyGator_854
Replied on August 11, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to A. User's post on August 2, 2015
Any clue yet anyone?
Installed all patch bundles for windows 10 But so far nothing is changing
Report abuse
Was this reply helpful?
Yes No
MF
Michael Fossati
Replied on August 18, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to WallyGator_854's post on August 11, 2015
Well, I haven't been so lucky and on one of my external drives the MFT was corrupted when trying to copy data to it using USB3. I had to purchase commercial data recovery software to get my data back...
My observations:
When I connect the external drive to the USB3 port, I'm getting tons of events 129 and 153, with disconnects and in one case a corrupted MFT as mentioned above. When connecting the same drive to a USB2 port, it works flawlessly (I'm just copying 1TB of data without any events in the system log).
Another observation I made is that apparently the disk when connected to the USB3 port enters standby/sleep pretty fast, I wonder if the problem we face is due to "AHCI Link Power Management"? There is an interesting article at http://www.nxhut.com/2015/01/storahc...to-device.html speaking to this problem with internal storage devices in earlier builds of Windows 10.
Would be good if Microsoft could let us know what driver should be installed, maybe something went wrong during the upgrade to Windows 10 and there is a mix with the previously installed drivers (I'm using an Asus P8Z77-V LE board with Intel Chipset and Asmedia chip for additional USB3 ports).
Regards,
Michael
Report abuse
Was this reply helpful?
Yes No
WA
WallyGator_854
Replied on August 19, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to Michael Fossati's post on August 18, 2015
- - - Updated - - -
[h=Using Scsi attached storage (uaspstor.sys) is causing BSOD & system hangs.]1[/h]After upgrading to windows10 from windows 7 my Lacie d2 Quadra external harddisk is not functionning properly.
The drive is properly recognized.
chkdsk doesn't report any errors.
As soon as you start writing/reading from it UASPSTOR reset warnings (Event 129) and IO operation retries (Event 153)
start appearing in de system log destabilizing the complete system.
I upgraded the bios and other drivers => No luck.
I only experience the problem with usb3.0 capable drives not with usb2.0 drives on the same port.
(My system is a Dell T7400 workstation which doesn't have usb3.0 ports. So the drives are attached to usb2.0 ports.)
So my guess is scsi attached storage driver is not functioning properly on my system (uaspstor.sys) and would like to
like to revert to usbstor.sys used in windows7 and still used by default in windows10 if it detects a usb2.0 drive.
Is there a way to get windows to chose the older usb 2.0 driver over the newer one? I am quite sure that will resolve the
problem i have.
This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread.
I have the same question (49)
Subscribe
|
Report abuse
[h=Replies (14) ]2[/h]
Previous
zilvinaslasauskas
Replied on December 3, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to WallyGator_854's post on October 19, 2015
Hello
Try this one:
http://forensenellanebbia.blogspot.l...beware_13.html
" Microsoft added native support for UAS to Windows 8. Drives supporting UAS load Uaspstor.sys instead of the older Usbstor.sys. Windows 8 (10) supports UAS by default over USB 2.0 as well.
That explains why UASP device works in "UASP" mode even if I plug it in on a USB 2.0 port.
Replace uaspstor.sys with usbstor.sys?
These are the steps for the workaround:
- boot into safe mode: within Windows, hold the SHIFT key and click Restart
- click on the Troubleshoot button
- select Advanced Options
- choose Command Prompt
- login into your admin account
- from command prompt, type C: and press Enter
- type cd windows\system32\drivers and press Enter
- type ren uaspstor.sys uaspstor.sys.old and press Enter to rename the file uaspstor.sys into uaspstor.sys.old (or whatever you like)
- type copy usbstor.sys uaspstor.sys and press Enter to have an additional copy of usbstor.sys renamed into uaspstor.sys
- close your command prompt by clicking on the "X" in the upper right corner
- click on the Continue button to exit and reboot into Windows 10 "
For me it works. Finally.
Report abuse
13 people found this reply helpful
· Was this reply helpful?
Yes No
WA
WallyGator_854
Replied on December 3, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to zilvinaslasauskas's post on December 3, 2015
Unfortunatly my old workstation experienced a critical failure unrelated to the usb drive problem requiring me to buy a new pc. I am now the proud owner of an Alienware Area 51 system.
Problem solved.
Hopefully this workaround turns out to be usefull for other people experiencing this type of problem
Report abuse
Was this reply helpful?
Yes No
https://filestore.community.support....d-8e421e89417b
LeonardoDV
Replied on December 3, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to WallyGator_854's post on August 2, 2015
I would, again, uninstall the drivers, then re-install them in Troubleshoot mode. (Right click on driver file for the troubleshoot option. Use the Troubleshooter to install the driver(s), not just to check the hardware.) I am pretty sure the problems that both you and WallyGator describe are due to motherboard (USB port) drivers. I have found the Troubleshoot-installation tool to work quite well with issues concerning wayward legacy drivers and programs.
homebuilt PCs - AMD, Intel, Nvidia
Report abuse
Was this reply helpful?
Yes No
ZI
zilvinaslasauskas
Replied on December 7, 2015
https://answers.microsoft.com/static.../inreplyto.svgIn reply to LeonardoDV's post on December 3, 2015
I would, again, uninstall the drivers, then re-install them in Troubleshoot mode. (Right click on driver file for the troubleshoot option. Use the Troubleshooter to install the driver(s), not just to check the hardware.) I am pretty sure the problems that both you and WallyGator describe are due to motherboard (USB port) drivers. I have found the Troubleshoot-installation tool to work quite well with issues concerning wayward legacy drivers and programs.Actually, I did not find out how to install driver in Troubleshoot mode. Uninstalling and re-installing in "normal" way gives no success. But, anyway, what I found in fact, the external portable disk works properly on USB 2 ( Win 8 / 10 ) only with usbstor.sys driver type, and as OS addresses to uaspstor.sys , the system has to be deceived by replacing the last one with usbstor.sys and renaming it to uaspstor.sys.
Report abuse
3 people found this reply helpful
· Was this reply helpful?
Yes No
Previous
- - - Updated - - -
- Replies: 28
- Views: 8,300
Device USB\VID_0080&PID_A001\MSFT30201503310007F was started.
Driver Name: uaspstor.inf
Class Guid: {4d36e97b-e325-11ce-bfc1-08002be10318}
Service: UASPStor
Lower Filters:
Upper Filters:
- Replies: 29
- Views: 8,335