-
July 31st, 2001, 02:43 AM
#1
Inactive Member
Im running with the 8lb pulley and the CRV crank pulley, JR BTC and Map Controller, RC 310cc injectors, Walbro 342, and Cartech FMU...should i upgrade ignition too??
-
July 31st, 2001, 02:53 AM
#2
Inactive Member
Nope, unless your using the ignition to retard timing such as a MSD6BTM.
------------------
Mods
-
July 31st, 2001, 05:01 AM
#3
Senior Hostboard Member
I agree with ZIP...
The stock ignition is good to about 325 crank HP, so no changes are really necessary.
------------------
'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph
-
July 31st, 2001, 04:58 PM
#4
Inactive Member
I ended up running a MSD 6al with blaster coil because of some mysterious electrical problem where i would crank the car, and it wouldnt start. problem developed on the stock ignition before 30k on my 99si.
no problems since the msd control unit, coil, and cap went in.
-
July 31st, 2001, 08:32 PM
#5
Inactive Member
thanks for the replies guys
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks