jim mvm pulley

[civic2003]

i have a gsr with jim mvm stepper pulley
with a stock crank pulley wat belt size is for the supercharger to alternater pulley

[JRCivic]

24.5 - 25.0" length... depending on the brand.

[civic2003]

jim how much for one of ur belt i need one i cant find this kind of belt so wat ur paypal address so i can send the money asap

[JRCivic]

My Paypal account is my E-mail addy: [email protected]

[allmota]

how much is ur belt jim so i can send u the money

[JRCivic]

The cost is one Andrew Jackson plus the shipping charges... call me at the shop and give me your shipping addy and I can get you an exact quote.

[Tad3d]

i didnt know you sell belts.
what brand?

[JRCivic]

It varies, however, usually I send the "kits" with a NAPA (Gates) belt.

[DC2NR]

not to thread hijack but,

what size belts are used for a stock gsr kit with 5 psi stock, and the sizes for a 8psi upgrade kit.

im not sure which one i got, so can i just measure the pulley on the supercharger to find out?

i think i have bad belts or incorrect sized belts

[JRCivic]

On a stock kit, the crank-to-alternator belt size is 800mm (31.5") and the alternator-to-blower belt size is 620mm (24.5").

When you say "8 psi upgrade", you need to be more specific as to which pulley you are changing so that I can alter the proper belt size for you.

Just to cover all three options, here is the list.

CRV crank pulley: change the crank-to-alt belt size to 850mm.
MVM stepper pulley: change the alt-to-blower belt size to 645-650mm.
3.8" blower pulley: change the alt-to-blower belt size to 610mm.

I hope this helps...