Results 1 to 4 of 4

Thread: Results of track day

  1. #1
    Inactive Member PaImportTuner's Avatar
    Join Date
    March 24th, 2005
    Posts
    118
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    best 15.1
    best 60' 2.4
    best mph 95
    none which were in any run together lmao.

    setup:
    engine: so after 2.5 hours of driving i notice my oil pressure is low. WOT 60psi insteaad of 78-80psi. so i raced anyways.

    trans: 3rd gear syncro is now F'd/grinding/missing due to racing a RX8 on highway driving to track. lol i beat it though.

    tires: 185/70/13 LeMans cheppy tires
    i went thru 4 tires 205/50 kuhmos and 195/60 yokos in about 2 weeks due to driving, frotn end suspension and alignment woes.

    but anyways
    heres the link go to username PaImportTuner
    http://www.honda-tech.com/zerothread?id=1050946&page=2

    <font color="#a62a2a" size="1">[ April 12, 2005 12:45 PM: Message edited by: NelsonV ]</font>

  2. #2
    Inactive Member PaImportTuner's Avatar
    Join Date
    March 24th, 2005
    Posts
    118
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    i got 14-15 runs in like 2 hours lol and no difference but getting slow. that run was the slowest and one of the last.

    the other dude(Bill aka StreetModified) had Nitto 555Rs on his hatch besides this motor:

    Engine Internals:
    Gude Head package:
    Bored throttle body
    bored intake manifold (port matched)
    3 angle valve job
    head milled to 11.5:1 compression (claimed by Gude)
    Crane stage 2 cam
    JE pistons (OEM dome)
    Cylinders bored .020 over

    Other performance parts:
    Gude programmed ECU
    AEM cold air intake (yes, this will be coming with the car)
    DC sports stainless header ( this will be coming TOO!!!)
    Catco hi-flow catalytic converter (SO WILL THIS!!)
    B&M fuel pressure regulator (set to 35.5 psi street, 37.5 psi race) (AND THIS!)
    DX crank pulley (lighter than Si pulley) (AND THIS!)
    Clutchmaster Stage 1 clutch (AND THIS!!)
    Accell 8.3 mm spark plug wires
    Custom powdercoated valve cover (bling)

  3. #3
    Inactive Member B20ZDC2's Avatar
    Join Date
    October 6th, 2003
    Posts
    144
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    That's pretty good time. The 60 foot time could be better with some better tires and maybe some suspension tweak! Mph is good. Run again in Maple Grove and I will bet you will have a faster time. Last time I ran was last year with my NA set-up, 15.100 at 91.13mph 2.290 60 foot time. Easy on the shifting. I was told that track is crappy to run?

    KC

  4. #4
    Inactive Member PaImportTuner's Avatar
    Join Date
    March 24th, 2005
    Posts
    118
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Originally posted by Chinaman:
    That's pretty good time. The 60 foot time could be better with some better tires and maybe some suspension tweak! Mph is good. Run again in Maple Grove and I will bet you will have a faster time. Last time I ran was last year with my NA set-up, 15.100 at 91.13mph 2.290 60 foot time. Easy on the shifting. I was told that track is crappy to run?

    KC
    <font size="2" face="Verdana, Helvetica, sans-serif">yeh beaver springs is ghetto but 14 runs in 2 hours isnt bad. and thats taking time to bs a little with other members.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •