MUAHAHAHAHAHAHA!! I spent the last 3 hours putting the finishing touches on the B16, and then started it! took a bit for the fuel to get flowing...but it lit up and ran great! A bit of valve clatter, but most likely needs a valve job done....I'll do it next week smile

a few Q's:

1. check engine light is on. I'm assuming it might be the secondary 02 that can be tied into the primary 02? I've heard that cures it?

2. The axles seem to bind on the hubs when fully torqued down? I removed the 'dust cover's', the metal rings on the inside of the hubs, it was better, but still binds. anyone have this trouble? they are the factory SiR axles.



------------------
PERFORMANCE REFINISHING, Inc.
Home to all your High Peformance Honda needs!

visit us at http://www.pri-racing.com