-
November 24th, 2001, 05:30 AM
#1
Inactive Member
Well, my first question is on throttle bodies for the D engines. I know on some motors you can pick up a TB from a newer style engine of the same series and it might have a bigger TB. Like would a D16Z6 have a bigger TB than a D16A? If so do they bolt right up? If so it would be nice to goto a junkyard and pick up a new TB and slap it on my motor (cheap performance gain). If anyone has a D16Z6 and a D16A TB could you compare them and see if they are built the same, if one is wider, etc.
And question # 2 deals with lower rear tie bars (not rear sway bars). How do these work? Will it make my tail end more happy or stick better? (I already have a neuspeed 22mm sway bar out back). Anyone who has one, what did you notice when you put yours on? I'm just trying to gather info on these puppies I might get one I might not so we'll see.
Thanks in advance!
Chris-
------------------
Suspenion Mods- More than you can shake a stick at...
Brake mods- I could slow down a buick if needed
Engine mods- Shit I knew I forgot something
-
November 27th, 2001, 04:24 AM
#2
Inactive Member
..I'll answer one of the questions...the z6 tb does not bolt up b/c its got a different bolt pattern..dont know about the size difference anyway. teg and zc tb's bolt up but I'm pretty sure they're the same size as the a6.
------------------
tahitiangreen91hatchsi
www.marked001.com
under construction
[email protected]
illadelphia, PA
-
November 27th, 2001, 06:54 AM
#3
Inactive Member
thanks jason!
Damn...I guess I can't be a cheap ass now and I have to get a stock one rebored...hehe. You gave me a start I can go from there, thanks again
------------------
Suspenion Mods- More than you can shake a stick at...
Brake mods- I could slow down a buick if needed
Engine mods- Shit I knew I forgot something
[This message has been edited by habib_88 (edited November 27, 2001).]
-
November 28th, 2001, 04:06 AM
#4
Inactive Member
-
November 28th, 2001, 08:36 AM
#5
Inactive Member
B18a1 and B16A TB's are larger by 3mm. Requries two studs to be removed...and moving over the other two holes a bit...then port matching. Eveything else is just custom lines and using a B16A TB Gasket.
------------------
-
November 28th, 2001, 08:38 AM
#6
Inactive Member
I have an Si Manifold at the sched with a B16A First generation TB modified on it. Anyone interested on more info on this, send me an email and I'll take a picture and explain.
------------------
-
December 28th, 2005, 04:16 AM
#7
megaagfan1
Guest
WOW...That is a terrifying situation...I'm so thankful that God kept you & your friends safe...
& like what mykidsloveAG said, God had you there for a pourpose! To help your friends little ones!
I hope that you can get some sleep! & peaceful dreams!!
~Megaagfan1
P.S.
Don't be afraid to cry! Just remember that God is always watching over all of us! You can just pray to Him & thank Him that He kept you safe, & that your DD wasn't there to whitness it!
Here is a Bible verse to help comfort you!
John 14:1-4
"Do not let your heart be troubled. Trust in God; trust also in me..." {Jesus is saying this to the deciples}Do not let your heart be troubled. Trust in God; trust also in me<u>John 14: 1-4</u>
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks