Results 1 to 5 of 5

Thread: tires

  1. #1
    Inactive Member Rescop's Avatar
    Join Date
    March 6th, 2006
    Posts
    26
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)
    Since I have put the low pro wheels on my sol it seems I am fighting the steering to keep if from drifting back and forth. Any ideas? The front suspension seems loose..New struts???

  2. #2
    Inactive Member Geo VP's Avatar
    Join Date
    July 21st, 2001
    Posts
    1,092
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    From the sounds of it, it's more of an alignment problem, but I would check the suspension bushings at the same time. They do break down as out cars are over 10 years old now. As to the shocks, they can be checked with the bounce check, push down at the corners and if it bounces more then two times the shocks are bad. Also do the rims fit tight against the center hubs or do they need Centric Hub Rings to center the wheels/rims as the problem started after the new rims/tires from what you stated.
    Hope that gives you a start with the problem.

    Geo
    President
    Team Sol of Washington

    banner38qx

  3. #3
    Inactive Member reewinder's Avatar
    Join Date
    July 11th, 2006
    Posts
    209
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Hmmmm...999...one more post and Geo hits 1k.


    [img]graemlins/cake.gif[/img]

  4. #4
    Inactive Member Rescop's Avatar
    Join Date
    March 6th, 2006
    Posts
    26
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I put a strut brace on it and that tightened it up a bit. I went underneath and see the cv joint boots are torn too. I tried to put on a front fiberglass bumper........OMG.....anyone know how much a shop will charge for installation?

  5. #5
    Inactive Member jasonweaver's Avatar
    Join Date
    December 6th, 2006
    Posts
    13
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I put on a oem bumper and it was a pain in the ass to put on. Its a two person job.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •