Looks much more like a 515 series. 803, & 416 and others have a rear cover held on with two small machine screws through the back, or label side. If you weigh it and its over 25 lbs, the conclusion is indicated even more.
Hi ,
I just traded for an older Altec 15" speaker it looks like it has the bakelite spider . Would this be a 603 or 416 ?
Would be more valuable to restore with the original spider and voice coil or as a modern speaker a GPA would say .
:thankU:
[IMG]http://i650.photobucket.com/albums/uu227/battradio/fcly.jpg[/IMG]
Mark
Looks much more like a 515 series. 803, & 416 and others have a rear cover held on with two small machine screws through the back, or label side. If you weigh it and its over 25 lbs, the conclusion is indicated even more.
Hollywood production which would limit it to a 515 or 515B no?
The phenolic spider is just barely visible.
Not all vegetables make good leaders.
I believe GPA will reuse the original spider.
Audio_by_Goodwill
Michigan, USA
pretty much in concurrence, an old 515, my guess is just 515 not B.
I think GPA can recone and either salvage the original spider or replace it. Check with them IMHO it would be worth more repaired and working.
Your neighbors called. They like your music.
Sorry to go a little off topic here but it reminds me of a similar question I have been wanting to ask.
My 416's read "416-8". Does this mean they are 416-8A's or what?
Sorry for getting loose here...
Battradio, it looks like a circa 1945 or 1946 model 515 from one of the early Voice of the Theatre systems. It will be worth more to a collector if you can retain the phenolic spider and original style cone. These drivers are sometimes called 515A, though AFAIK Altec never gave them that designation.
Now about that 1400 series RCA woofer the 515 is sitting on... yum!
Bookmarks