No, not yet. I have to break him of the many bad habits ( IMHO ) that people follow with ALTEC speakers. He is all screwed up as it is now. IMHO. Subwoofers, complains about no " sparkle" up top, etc etc etc.
The ONLY way I can help him, straighten him out, is to finish my new SET DC 2A3 amps, and invite him over for a good A7-800 listen. Then, hopefully, he will get on board. Need to re-do my amps.
Heck, I have two or three months of DIY work ahead , just to get "proper" reference-quality amps. THEN, I will have him visit.
I am only NOW designing these amps' custom Power Transformers.
The amps' direct coupled two stage circuit I have computed and simulated, but there will be brand new lay-out challenges, because I am incorporating experimental ( 1500 Ampere peak ) film caps, in three key / critical power supply locations, and the caps are each very large. Industrial parts , 3 inches in diameter.
We met, face to face, and he saw my set up, so I believe we will have a continuing relationship. LOL, he mildly boasted about owning 2,000 CDs, and so, I refered him to 10,000 LPs in a spare bedroom. Hes a nice guy, electronics technician.
Just need him to "hear it all", as I hope to execute this in the coming months. Some of the crossover mod ideas I had for Model 19s, I HOPE to have the new owner execute at his place. I gifted him with about 100 feet of Mil Spec M22759/11 wire, ( double 12 AWG as lead ins to the crossover's input - and for each woofer polarity, 16 AWG to the 802s ) so that he can totally eliminate every inch of the stock ALTEC internal wiring, as his very first step.
" An inch of bad wire can ruin the musical experience ", Robert W. Fulton 1925-1988.
Jeff ....Low Ohms
Bookmarks