-
So far I have only seen it used in hunting gear but would this not be a killer way to do toys? NO more blotching or overbleeing with the paints.
DIPPING PROCESS
The dipping process can be described as applying a decorative pattern to any part of an object with the use of water and film in a stainless steel tank. This film is cut to size for each part dipped and placed on top of the water in the dip tank. Each part dipped is geometrically different and requires a different angle and speed to ensure proper coverage. The activator dissolves the film leaving the ink floating on the surface. The object part is then immersed through the ink and the water forces it onto the part. After the part is dipped the tape is removed and it is placed in a rinse tank. After rinsing it is inspected and placed on a hanger to dry over night.
POST DIPPING
After the object has been dipped we have reached the half way point. The day after it has been dipped any area of the part that was not dipped is taped off. Next we cover the part with a clear finish. The clear coat is also a automotive grade solvent. The clear coat is what gives the part its durability and protection from the elements. After the part is dry to touch the tape is taken off and the part is unjigged and placed on a shelf with the rest of its numbered.
-
So this is not a Nachos topic ?
-
it's called marble-ing... you can do it without any film. to get the kleenex pattern you just run a toothpick back and forth through the paint floating on top before you dip anything it. i had an ex how made me all kinds of crap that way. i think i still have a couple ties somewhere that she did...
-
I wonder how well that would work on plastic. The technique isn't new, although I'm sure they've come up with some advanced chemistry since I first heard of it in 3rd grade. Ever notice those metallic swirly patterns on a Kleenex carton? I once knew how to do that...long forgotten, though. By the sound of this, it's a very similar method.
