Help for Altec MR 902-16 HF data

Printable View

February 13th, 2009, 09:38 AM
mikebond

Help for Altec MR 902-16 HF data

Hi!
I need data for Altec MR 902-16 HF high frequency CD horn/driver. I only know they are 15w 5000-20000 Hz. Nothing more. Any help will be very much appreciated.
Regards
February 13th, 2009, 11:25 AM
whitebroncoii

Re: Help for Altec MR 902-16 HF data

The MR902-16HF super-tweeter is a 16 ohm 902 driver and small Mantaray horn on a bracket. The horn is very similar to the Mantaray used on 604's. These were used primarily by Japan. It seems the Japanese like lots of sizzle on the top, even in arena or stadium installs. I have seen photos of large clusters with rows of MR902-16HF horns mounted to the edge of large-format MR horns. I have a data sheet that I can send you.
February 13th, 2009, 11:29 AM
dbale

Re: Help for Altec MR 902-16 HF data

Here's a spec sheet.Link
February 13th, 2009, 11:51 PM
mikebond

Re: Help for Altec MR 902-16 HF data

Thanks a lot for your help!!
February 14th, 2009, 12:32 AM
417 - Alnico

Re: Help for Altec MR 902-16 HF data

Altec Lansing Professional Audio - Vintage Speakers There is a Ton of info in this page...just scroll up when the page is loaded.
December 28th, 2011, 03:39 AM
417 - Alnico

Re: Help for Altec MR 902-16 HF data

Quote:

Originally Posted by 417 - Alnico

Altec Lansing Professional Audio - Vintage Speakers There is a Ton of info in this page...just scroll up when the page is loaded.

This sux... address had great info, hopefully some one was able to scan it. it had tons of spec sheets. ##(*&%#$&*&^%
December 28th, 2011, 04:45 AM
Altec Best

Re: Help for Altec MR 902-16 HF data

I have them all so do a number of us here ! Try this link .

Altec Lansing Professional Audio - Vintage Speakers