Any good idea to replace 20kohm volume pots on Altec 9440A

Hi
As the volume potentiometers has a substantial influence on the sound I wonder if it is a good idea to replace these old 20kohm potentiometers with new ones on an Altec 9440A power amp?

Any recommendations for replacement. The same type, Alphs (may not fit) or stepped attenuator ?

Anyone done it ? Any idea for good replacement ?

Not any good idea ! The originals are good enough !

Any input appreciated

If it ain't broke don't fix it. Altec had some of the best brains available, I seriously doubt cut and try is gonna gain much. And likely will make it worse.

Keeping physical construction quality aside (which affects the longivity & immunity to being scratchy early), a volume control replacements will affect the sound quality only when one changes the value, otherwise not. Changing the value changes the impedance loading pattern inside, and hence a possibility of FR changes.

But as OG has already suggested, why change it unless it is really damaged ?

Well, many says that for example a stepped attenuator sound s much better than an film potentiometer and Blue Alps potentiometer sounds better than most of the other brands.

Accordingly they recommend to replace with the above to get better sound.

I have not yet put the Altec 9440A into the hifi system, but read that the high frequencies are not as good as the lower frequencies and thought that replacing these could enhance the performance.

A widely held view may be incorrect.

Quote:

---

Originally Posted by mah

A widely held view may be incorrect.

---

Many once thought the world was flat.

Quote:

---

Originally Posted by Old Guy

Many once thought the world was flat.

---

They must not have lived in San Fransisco or Seattle.

Quote:

---

Originally Posted by Old Guy

Many once thought the world was flat.

---

Define many.

The Flat Earth Society

No, i am not a member or subscriber of the notion.

:D:D:D:D:D:D:D:D:D:D

Quote:

---

Originally Posted by bowtie427ss

Define many.

The Flat Earth Society

No, i am not a member or subscriber of the notion.

:D:D:D:D:D:D:D:D:D:D

---

Bowtie the operative word is ONCE. At ONE time VIRTUALLY ALL the authorities agreed the world was flat.

Flat Earth - Wikipedia, the free encyclopedia

Now, just crackpots.

Quote:

---

Originally Posted by MerlinVSM

Well, many says that for example a stepped attenuator sound s much better than an film potentiometer and Blue Alps potentiometer sounds better than most of the other brands.

Accordingly they recommend to replace with the above to get better sound.

I have not yet put the Altec 9440A into the hifi system, but read that the high frequencies are not as good as the lower frequencies and thought that replacing these could enhance the performance.

---

A good pot can improve over a horrible one. But not much over a good one. The Altec does not have horrible pots unless they are bad. You are thinking of spending money and a lot of work to gain "not much."

Check improving your source signal, clean mains power, and caps in the amp first. Your priorities are off IMHO. Lots of work for small gain, especially if any other issues. Speaker placement will make more difference than the pots will. But the way you are talking your mind was made up before you posted.