I had my headlights pushed back so there was kind of a nasty space between the headlights and the corners. So I popped the hood and took a lot inside and saw this screw that was attaching the light to some angular metal thing. So I took a Screwdriver and turn it and the headlight slowly popped back out and is now flush with the corner. It is not pressed up tightly against it because I have a 89 and that was when there were screws instead of clips so I don't know if I can get it any tighter but it looks good now.
And then I was messing with my hood trying to get it to close better. I noticed the latch mechanism had this screw inside the spring. So I turned the screw so that it went further inward and when I closed the hood it was a lot better. So I did that some more so now my hood closes right with the top of the headlights. No more big space for air to get under.
And I went to the dealer and go some NH565 Touch Up paint and painted in those black primered spots on my Fenders. It doesn't look great but from a distance it is a lot less noticeable than the black spots so that is at least and improvement but I need to run another coat on top to get rid of the milky look.
------------------
