ZC wiring

I should use all the wiring that cam with the zc correct? I shouldn't take the wiring and all the clip off of my 1.5 and use them right.

------------------
http://home.bendcable.com/travis118/
ZC in the Works....

it's easier to modify your existing harness.

all you need is a resistor box and a MPFI ECU.



------------------
*****
1990 Civic H/B *wrecked & being parted out*
*****
ZC Powered 90 CRX SI With Mods
I/H/C/E
+

-----------
planned
-----------
- Rims (15")
- Turbo

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Kunundrum:
it's easier to modify your existing harness.

all you need is a resistor box and a MPFI ECU.



<HR></BLOCKQUOTE>

Even if i have the base model civic with only 2 injectors instead of 4?? where and what do i need to modify? (besides the dizzy)

Will all the sensors hook up from my existing harness?


------------------
http://home.bendcable.com/travis118/
ZC in the Works....

[This message has been edited by travis_118 (edited February 10, 2002).]

As far as i know, you need the resistor box, ecu(si, teg, zc, whichever your using), some wire, injectors, and i think you may need a couple extra plugs. It would be for that reason that you may want to pick up an si harness to canabalize. Heres a link to the wiring info, should get you through fine: http://hybrid.honda-perf.org/tech/4gdxtozc.html

------------------
1990 Civic LX(4door
power!)
ZC swap
Chikara header
Red wires and
valve cover
A system too

Unless you are a wiring guru, you are gonna want the SI harness + all the stuff mentioned by Phatman.

------------------
97 Civic- lsvtec
89 4dr civic-zc(soon)
86 buick- winter beater

instead of rewiring my std harness can i just use the entire si harness?

------------------
http://home.bendcable.com/travis118/
ZC in the Works....