-
ok i bought my new civic hatch today, and when i turned the knob from cold to hot, it clicked and got stuck on the hot, now i tried to turn it to cold and it clicked and wont work now, it stays on hot, how do i fix this or do i need a new one...if so does anyone have any for sale for a 89 Si (has A/C control switch if that matters...)
------------------
86 CRX Si-dead
89 CRX Si-flipped
88 Integra-sold and currently borrowing
86 CRX DX 1.6 16v-sold
91 Civic ZC-sold
Looking for a CRX/Civic Hatch...
---------------------------------
AOL/AIM-crxgator
MSN-crxgator
ICQ-60405613
-
i have the climate controls from a 90 crx dx..would those help?
------------------
-Ben L.
1989 Civic Si
1990 300ZX TT Stage III
-
Are you saying you turn the knob but the heat setting doesn't change? Pull the knob off the control shaft. The knob is most likely broken. About 3 or 4 bucks at the dealer.
------------------
'90 Civic Si
-
ok, i think i understand now, and no my climate control setup won't work. the knob is connected in the back to a mechanism that pulls and pushes on a wire. what you should do is if it isn't the knob that's broken, take your console off and take the screws that hold the climate control out so you can look at the back/top of it..i'm thinking maybe the mechanism broke or maybe the wire came loose? anyways, take the controls loose and you might get a better idea of what's wrong. if you have to change controls, those little wire things are a pain to reconnect..let us know
------------------
-Ben L.
1989 Civic Si
1990 300ZX TT Stage III
-
gator,
what did u buy now?
------------------
1991 Flint Black CRX Si with I/H/E.
1988 Barbados Yellow ZC CRX Si with I/H/E.
-
thanks for the help, ill fix it next weekend or at least try to...
petey- 89 Civic Si-LS/VTEC swap and a bunch of other mods...13's baby...
------------------
86 CRX Si-dead
89 CRX Si-flipped
88 Integra-sold
86 CRX DX 1.6 16v-sold
91 Civic ZC-sold
89 Civic Si LS/VTEC-current
Looking for a CRX/Civic Hatch...
---------------------------------
AOL/AIM-crxgator
MSN-crxgator
ICQ-60405613
-
yeah sounds like the arm on the control panel too. I'm betting it was really tight to move it to begin with. Yoru gonna want to fix the problem, and that's the valve in the engine compartment at the firewall.
------------------
