Steel braided fuel line

Printable View

November 6th, 2001, 07:46 PM
ITR1416

Does anyone know where I can get a steel braided fuel line going from the fuel filter to the fuel rail? Does anyone even make one?

------------------
00 ITR#1416 JRSC 5.5PSI
JR BTC, JR Map controller
Cartech FMU, Comptech Ice Box, Clutchnet Clutch, CM aluminum Flywheel
November 6th, 2001, 08:43 PM
TurboGSR

i can make one up for you...

what fuel rail are you using?
stock fuel filter?

------------------
<A HREF="http://www.drive.to/TCL
www.citylimitracing.com
1998" TARGET=_blank>www.drive.to/TCL
www.citylimitracing.com
1998</A> GSR black now yellow... FULL BLOWN PROJECT Y2K.
November 6th, 2001, 08:48 PM
ITR1416

Can you really? It's a stock fuel rail and a stock fuel filter. This is for a 2000 Type R. Is it going to make a difference that I already have a B&M fuel gauge on there? It uses the same bonjo connectors right? How much?

Thanks!!

------------------
00 ITR#1416 JRSC 5.5PSI
JR BTC, JR Map controller
Cartech FMU, Comptech Ice Box, Clutchnet Clutch, CM aluminum Flywheel
November 6th, 2001, 10:50 PM
Nieman!

you can't buy one anywhere.

------------------
JRSC 6psi GSR,
many, many mods
www.streetimage.net take a look I hope you like what you see.
November 7th, 2001, 03:30 AM
brian b

check out http://www.anplumbing.com they have all the parts you need.. to plug into the fuel filter you need a 991945 id imagine going into the stock fuel rail its the same, you might want to take the two banjo bolts out and compare them.. get some hose and some hose ends and your good for like 40 bucks

------------------
November 7th, 2001, 07:48 PM
blownintegra

A good hose company can make you one.

Amazon hose in Tampa made mine.

I just put in a Japan motor into an old CRX with all of the fitting on the wrong side, so I had one made, cost like 60 bucks. Braided steel with brass ends. They use your old ends so everything works.

Looks nice too.

Mike

------------------