Printable View
Hey all,
I was wondering if the prelude injectors, I am assuming 96+ VTEC, will fit in my 98 GSR, I mean plug in? Or maybe with little hastle be able to be wired in? And what is the difference between the two. I think the GSR injectors are like 250cc and the Lude ones are 290cc????
Thanks
Adam
------------------
JRSC@6PSI, AEM Intake, Greddy Exhaust, DC 4-2-1 Header, JR BTC, Cartech 20005, B&M Edge shifter, A/F-Boost Gauges, H&R OE Sport Springs, KYB AGX Adustable Struts
One generation Prelude was a different kind than what we need. There have been several topics in the last several months. They are 290cc though. The ones you need are of the last gen Prelude I believe. Hopefully someone else will chime in b/c I basically didn't tell you anything did I?
Good luck.
Zach
------------------
94 Civic Coupe/LS Hybrid
JRSC@6psi
Turbo Convert
Import Specialty Automotive (253) 473-2606
93-96 VTEC Prelude Injectors are 330cc Peak and Hold (low resistance) 97+ has 290cc saturated. I don't know if you use saturated or high impedence. I think they're saturated for OBD II Integra's, right?
I have a set of saturated 290cc Prelude Injectors with clips for sale if you want them.
------------------
DirtyLude
Toronto Prelude Club
If CROM doesn't want them then I would like your 290cc injectors - my GSR seems to be running lean and I can't find any prelude injectors at the local junkyards, and don't want to fork over 3 bills for new ones.
Richard
------------------
98 GSR driven everywhere.
Akimoto intake, MSD 6a, Magnecor 8.5mm, Autometer A/F,Boost,F/P, B&M F/P, NGK BKR7E, JRSC, JR MAP Mod, Walbro GSS-342.
Ex-Squeezer.
Open Import Fuel Tuner
Yes Adam...
'97+ Prelude injectors will plug into your '98 GSR harness and function properly in your car.
... and yes, they are in fact 290cc.
------------------
'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph
The GS-R has 240cc injectors stock. I am unsure about the LS though.
------------------
GSR and LS motors both have 235cc injectors.
No, it does not work on a '95 GSR... the '92-96 Prelude injectors will plug in, but they are "Peak/Hold" injectors which means that you will have to run a resistor box with them so as not to fry your ECU.
------------------
'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph
[This message has been edited by JRCivic (edited November 07, 2001).]
Does that work for a '95 GSR?
------------------
6 psi JRSC GSR: GSS-317, 3" intake -> 217 hp/155 ft-lbs.
New: BTC, MAP controller, and stock timing!
Soon: Endyn stepper?
Anyone know what the stock cc's are on a GSR and LS?
------------------