Removing exhaust manifold heat shield = problems ?

I've seen several pics where the exhaust manifold heat shield has been removed. Does this lead to problems such as discoloration of hood paint, or heat damange to A/C lines, etc ? Thx.

You should be fine. I don't know of anyone here that uses a heat shield unless they still have the stock header.

Zach

------------------
94 Civic Coupe/LS Hybrid
JRSC@6psi
AEM CAI
DC 4-1 Ceramic Header
Test Pipe
GReddy PE exhaust
Magnacore 8.5mm Wires
MSD 6A
Skunkworks Coilovers
ACT 6 Puck
Turbo Convert

The only reason you would remove it in the first place is to switch to a header. In this case you can't reuse it because it won't fit. As far as extra heat goes, I never had a problem. It should be fine.

------------------
"99" GSR Emerald green sedan-6 psi /JRSC,Walbro 255 lph fuel pump,AEM CAI,Comptech stainless 4-2-1 header,Comptech stainless exhaust,MSD 8.8 ignition wires,Comptech upper and lower strut brace, Comptech sport springs,DC short throw shifter, JR btm, chrome KMC Tarantula wheels on Toyo 205/45ZR 16" Proxes T1S tires, Power Stop cross drilled rotors, Energy Suspension motor mount inserts, Piaa 1700 plantinum driving lights w/Pia Super whites replacement bulbs,walnut woodtrim interior,etc...


Wing/future dark tinted windows and very proud!

Thanks for comments. I have stock header. The reason I removed the heat shield is that I'm searching for an exhaust leak. I'm hearing a Phsssssssst sound at about 6K RPM and it isn't from a turbo. My setup is a '98 ITR with JRSC. Yup, that stock exhaust manifold is nothing to be showing off.

The heat shield is installed by Honda to protect the fan shrouds, fan motors and A/C lines. Romoving the heat shield will in fact hasten the decay of these items due to excessive exposure to heat, however, real damage will take a long time.


------------------



'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph