BKR7E-11's?!

Printable View

January 24th, 2001, 08:55 PM
The ANTI-RICE

I bought some from MOSS MOTORS when i got my JRSC, and i think i got RAPED at 2 bucks a plug...

Its been about 20K miles on the BK's now, and i believe its time for NEW ones. Where can i get some?! NO ONE AROUND HERE CARRIES THEM?!

Thanks,
Tony

------------------
96 GSR, Kills RICE in 4.96 seconds...

Come see MY world... http://maxpsigsr.overboost.net
January 24th, 2001, 09:09 PM
sjoback

www.monarchproductsinc.com

carries all ngk stuff. 2 bucks a plug doesn't sound like a raping. what are they supposed to cost? 50cents?
January 24th, 2001, 11:19 PM
Sonnyballs

Would I have a problem (fouling?) in running these plugs in my NA car before doing the JRSC install?

Also, is the BKR7 the coldest plug made? I run NGK BR10's in my Honda CR80 shifter kart engine. In races where there is 1 lap qualifying, I install a BR8 for qualifying since the BR10 has a tendency to foul when driven hard without adequate time to "warm up". The BR8 is a hotter plug and is ideal for short stints (like 1-lap qualifying).

Thanks,
Sonny http://www.hostboard.com/ubb/smile.gif
January 25th, 2001, 03:23 AM
jchcinmax

I use the BKR7EVX-11's , the platinum version of the mentioned plug. About $6 apiece.

------------------
Romans 5:1,John 3:16
96 red GSR w/mods..like a JRSC. BTW, remember that amateurs built the ark and professionals built the Titanic.
January 25th, 2001, 03:47 AM
Team Hostboard

Intersting as when I spoke to Keith at JR he recommended NGK ZFR7F spark plugs. These are also stock on most Honda marine out board engines so seem to be a bit easier to find or at least in my area.

------------------
...Steven
Powered by Endyn

Tech Spec
January 25th, 2001, 03:55 AM
zip

Just use the copper versions. They don't last long but they perform well.

http://albums.photopoint.com/j/View?...646&Sequence=0

------------------
Mods
January 25th, 2001, 02:42 PM
5 Liter Eater

There is very little difference between the BKR and ZFR plugs. Either one will work well. I will look at my NGK book and see the exact difference when I get home.

------------------
Bill Winters
Houston, TX
'94 bone stock GSR
January 25th, 2001, 03:02 PM
rjaffey

The ZFR plug has a projected nose (it's longer).
January 25th, 2001, 06:51 PM
AvanishV

How often should we swap out the ZFR's? In other words, how long do they last?
January 25th, 2001, 08:22 PM
5 Liter Eater

Thanks Rafe! Now I remember.

So if that is the case then IMO the ZFR's are the better choice as they are less shrouded. The only concern might be if you have cam gears there might be interference but I doubt it.

I believe the ZFR's are more commonmy found at parts stores.

------------------
Bill Winters
Houston, TX
'94 bone stock GSR