Printable View
Hi, has anyone had any experience with front mounting these onto cabinets. Apart from needing to modify the cutout for the 'vane' like parts, any other issues?
I want to make cabs for my six 604e's but wnat to avoid needing a removal front baffle or rear panel.
Thanks
Pretty much just cutting the notches.
Might want to do a search of the board- I remember pics posted in the past.
I did it on my 19 clones and although it is easy enough to do, the major drawback is there is no material left in the wood to use T-Nuts for mounting the speakers.
http://www.hostboard.com/forums/hbmc...2008/05/14.jpg
Gary
Hi
I recall an Altec enclosure drawing with a plywood ring . The speaker is mounted to the back of the ring. The ring is front mounted into a large hole in the baffle board.
Don
Hi people, thanks for the pics and advice.
Gary what method did you use to secure the drivers in the cabs then?
<font size="2" face="Verdana, Helvetica, sans-serif">hmmm...I had no problem...Quote:
Originally posted by gamalot:
I did it on my 19 clones and although it is easy enough to do, the major drawback is there is no material left in the wood to use T-Nuts for mounting the speakers.
...
Gary