Printable View
I might as well replace my SC belt, and also my alternator belt while I'm changing my idler pullies.
Can somebody tell me what size belts I need.
Integra kit, 8psi.
Thanks!
------------------
<A HREF="http://www.groupbuycenter.com/
http://www.groupbuycenter.com/integra/" TARGET=_blank>http://www.groupbuycenter.com/
http://www.groupbuycenter.com/integra/</A>
8psi JRSC with Blower Pulley Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 23.4"-24" = 595mm-610mm
------------------
Greg Holden
96 GSR, JSRC @6psi, AEM CAI/RSR 4-2-1/Greddy PE, Cartech 20005/Walbro GSS-342/TPS Mod, JR BTC, KYB AGX/H&R OE Sport/ST 19mm Rear Swaybar
Best 1/4 ==> 13.937 @ 101.41mph
My JRSC Install Site
Holden beat me to it... I use a 605mm SC belt and have a little over half the adjustment left...
------------------
1998' 4dr GSR, 8psi JRSC w/hand ported plenum, 320cc injectors, Cartech adj. FMU, Walbro HP fuel pump, TPS trick in the works, valves set to .005i/.006e, MSD BTM, B&M CommandFlo regulator, stock intake w/ITR "cool air" resinator, Greddy sp exhaust, Tokico Illumina 5-ways, ITR springs, Skunkworks 22mm rear swaybar(removed due to mount torn out at present), ES motor mounts and front swaybar bushings, 205/50WR/15 Kumho Supra 712s, KVR Carbon Fibre pads, Super blue dot 4 brake fluid, B&M fuel pressure gauge, Autometer sport comp A/F gauge in dimmer location
...
YLW 00' Type R #00-1011 with "special tuning" and 143db triple air horns
Honest officer, I had no idea how fast I was going...the speedometer only gos to 150...
3 rib right?
I thought all our belts are 4 rib.
Question, whats the belt sizes for a stock JRSC GSR? I just want to see how much they differ from a R's belts.
------------------
Mike Marsey
'98 ITR #0717
Supercharged w/218whp @ 5.5psi
For all your JRSC type R questions, go to:
http://www.geocities.com/superchargedtyper/
All GSR belts are 4 rib.
Stock Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 33" = 835mm
6psi JRSC Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 24.5" = 620mm
8psi JRSC with Blower Pulley Belt Sizes
AC = 31" = 790mm
PS = 36.5" = 930mm
Alt. = 31.5" = 800mm
Blower = 23.4"-24" = 595mm-610mm
10psi JRSC with CRV Pulley Belt Sizes
AC = ????
PS = 900mm
Alt. = 850mm
Blower = 24.5" = 620mm
------------------
Greg Holden
96 GSR, JSRC @6psi, AEM CAI/RSR 4-2-1/Greddy PE, Cartech 20005/Walbro GSS-342/TPS Mod, JR BTC, KYB AGX/H&R OE Sport/ST 19mm Rear Swaybar
Best 1/4 ==> 13.937 @ 101.41mph
My JRSC Install Site
[This message has been edited by Holden (edited February 04, 2001).]