I just wanted to know where the JRSC support bracket goes? Does goes on the stock bracket or is there one? I got my JRSC installed and I don't remember having a support bracket on the JRSC because it hangs lowwer than the stock intake manifold.
Printable View
I just wanted to know where the JRSC support bracket goes? Does goes on the stock bracket or is there one? I got my JRSC installed and I don't remember having a support bracket on the JRSC because it hangs lowwer than the stock intake manifold.
I am not sure about Integra, but JR says that the support bracket isn't needed for installs on Civics
------------------
95 Civic SOHC VTEC, JRSC,JR fuel pump, RC 240cc inject.,Greddy exhaust,Ground Controls,Tokico Illumina,rear ST swaybar,Nuespeed f&r upper bars,GAB lower f bar,f&r camber adjuster,Powerstop rotors w/ Porterfield pads
The braket bolts on the new kits to the nose of the blower with a braket you install to the lower alternator braket, which is new. I would get JR to fax you the install instructions.
If you have the support bracket, you would be able to see/feel it by feeling all the bolts around that secure the pulley section of the SC. to the main housing.
Pictures of the uninstalled bracket are on my site.
------------------
Greg Holden
96 GSR, JSRC, Walbro regular pressure pump, AEM cai,
RSR headers, Greddy PE, Brembo Cross-Drill rotors,
DC Sports Rear Strut Tower Brace (junk!), Yoko AVSi
Greg Holden's JRSC Install Site
if you have any dual overhead cam engine....It is required...if you don't have one...JR will send you one....
------------------
1996 Integra GS-R 4dr
license plate reads "BLWN GSR"
13.81 on street tires with full interior and stereo
Thanks for the replies....