-
I'm confused on what parts I need to purchase for the Moroso Catch Can. Here's a link for the parts and their numbers.
The Moroso Racing Vacuum Pump; Part number: 85465
http://moroso.com/catalog/categorydi...?CatCode=13111
OR
The Dry Sump Breather Tank; Part Number: 85470
http://moroso.com/catalog/categorydi...?catcode=13400
*Note: I don't see the fittings on either of these catch cans for the line coming from the crank case fitting, nor the return line that goes to the air intake!?!?!
Sorry for my stupidity, I just don't want to buy the wrong damn part(s).
Thanks,
Tim
------------------
95 EX w/ SC JDM B16
210WHP/144ft-lbs
[This message has been edited by BoostedEX (edited February 15, 2002).]
[This message has been edited by BoostedEX (edited February 15, 2002).]
-
Those links aren't showing up right.
I would assume it's the second from the description. I don't think you need the vacume pump.
As far as the fittings, you can pick up the side fitting at a Hone Depot or similar place, brass 90 degree elbow is what I used, with the right size thread and barb for your setup.
For the top, PCV fitting, I uses some ford PCV grommet I got at Pep Boys and a PCV valve that will fit it. I got the numbers from doing a search on the Endyn BBS under "catch can". Too lists some part numbers.
