Which bearings to use ??????

I was curious to see who is using what main bearings and rod bearings ??? such as stock honda, federal mougal, clevitt 77s.. ??
and what prices did you pay?

------------------
[email protected]

stock honda, about 15 for rod pair, 20 for main. somewhere in there.

I am using honda bearings. They are tri metal like clevites. Come to think of it they probably make them for honda! http://www.hostboard.com/ubb/smile.gif

Most fools are scared to use anything but Honda. Honda parts are built for factory applications. Not for performance. You need to use a bearing that will handle both boost and high rpm's. You better do some calling to some import engine builders and ask the pros thier thoughts.

have you ever opened up an issue of circle track and see advertisements for V8 cranks modified with modified crank journals to honda specs? people spend alot of money on those things for a reason, that being to use a honda bearing.

Just an opinion.. I would stay w/ honda, if you are looking for different clearances you can use a different bearing size. Honda bearings are color coded. They have brown, red, green, and others. As for food for thought, the difference between each color is 5 microns. Honda motors inherently run much tighter clearances than domestics. But as I stated earlier, honda bearings are very very good. If you look to another bearing thou stay w/ a tri metal. And if you still insist on going w/ aftermarket, clevite also uses trimetal. They are just slightly less expensive than honda bearings. My guess is that they make the bearings for honda http://www.hostboard.com/ubb/smile.gif

------------------
1992 Red Honda Civic CX Hatch Back... COMING VERY SOON: B18C1 hybrid w/ major weight reduction and boosted by Jackson Racing supercharger at 8psi..

1998 Super Sonic Blue Integra GS-R (completely stock now)
With jrsc at 6psi best 1320: 13.783 @101.43 on drag radials