Printable View
Someone asked about them....
Here they are. Haven't even been broken in yet. (Motor gave up)
http://albums.photopoint.com/j/View?...Sequence=1.gif
------------------
95 GSR
JRSC @ 11lbs, Dry Manifold NOS (Track), DC Header, Nakayama Intake, Brospeed Exhuast, RC 310cc injectors, Holley Pump, STR rail, Hyper R, B&M oil cooler, MSD6BTM, Blaster coil, MSD Cap, ACT 6 puck, Baer 13" Kit, Slotted/Xdrilled rear, Stainless lines, M/T for the track, blah, blah, blah......
229hp
185 ftlbs w/o juice
Very nice! Can there be such a thing as too much stopping power?
Damn! http://www.hostboard.com/ubb/eek.gif let me pck my jaw up off my keyboard. I love them. Are those 17's or 18's and how do you plan on fitting wheels with slicks on in front of those? Also what was the milage on the motor and the diagnosis since you said the motor gave up on you? Did I say I liked the brakes yet?
------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, Airmass header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, Ground Controls and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down and soon to go on a Carbon Fiber diet.
17's.....
Brakes easily come off and refit factory brakes... Slicks are mounted on Factory 15's.
Lost rings in cylinders 3 and 4.
Happened before brakes went on...
Brakes were on the way already...
Put the brakes on before we knew what waws wrong with car...
Stop the car good rolling off a trailer! http://www.hostboard.com/ubb/smile.gif
Very nice! Will they fit 16" wheels? I think that would depend on wheel's offset, right? I have SSR Schumachers (offset 38 - +/- ?). You think I should have any fitment problems w/ 12" Track system? How much did you pay for yours? Thanks.
Beautiful!!!
Those rotors are beautiful !!! I am sooo envious... I cannot make myself buy big brakes for the civic 'cause I don't want to have to change them back to stock every two weeks (this is how often I go to the track).
My Del Sol on the other hand...
------------------
'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph
Baer says their kit will fit some 16's... Most 17's. Apparently Enkei Zenkei's do not count as "most" 17's. That's what was on the car before. In fact, my buddy's 17" Wildcards would not fit either. If you call them, they can email you a template to test fit them to your wheel. Obviously I was using the template incorrectly.
Here's another shot....
http://albums.photopoint.com/j/View?...Sequence=0.gif