MSD BTM PROBLEM?

HEY WAVEOFF, JUST HOOKED UP MY MSD BTM 5462 ABOUT A WEEK IN A HALF AGO. NOW MY STOCK TACH AND CRUISE CONTROL ISN'T WORKING. MSD SAID I MIGHT HAVE TO GET AN ADAPTER. DID ANYONE HAVE THE SAME PROBLEM?

THANKS, JOHN INTEGLS JRSC

I don't think the MSD has something to do with this. Check at your connection to your speed sensor on your tranny. It's right under the TB. When not connected, no cruise, no speedo and normaly the check engine should turn on, at least it does it on my Civic. Hoe this help.

------------------
To 24 PSI, and beyond !
HS Le Club

thanks civic tsi. i found out that i need a signal amplifier.

later, john integls

John,

The MSD part number that you need is 8910. It simply T-taps in to the igniter and coil wires to amplify the TACH signal. I have used this on two different LS models... none on GSR models.


------------------



'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph

thanks for your help jim


later,john

HEY would a BTM help alot for sc guys?
from what i kno the BTM retards timing for every pound of boost. that helps alot for turbo guys but with my sc i hit 6lbs instantly so wouldn't setting timing for every pound of boost be a waste ??

------------------
99 white gsr
18x7.5 te37
oem front lip
tein type na
greddy exhaust
intake, JG tb, aem pulleys,
JRSC

Good point on the instant boost but it's not always so instant, it really relates to your RPMs.

Just installed the MSD 6 BTM on my integra and have finally got my timing back to stock (even higher really - 16 BTDC). This has substantailly and very much noticably improved my off the line response, It feels torqueier, but I need to tune it a bit, it may be taking out to much timing at full boost - it's not as much of a rocket as it felt like before, but that might be because it's not bogging at 8 degrees BTDC any more so it's just more gradual. I play with it some more and open a thread about it's real abilities after I've tested it out for a bit.

Allmotor+... ideally, you only want to take out from .5 to .75 degrees of timing per pound of boost. Anything more than this will hurt your top-end performance.


------------------



'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph