-
Hey guys,
I just got 13x8 Bogarts for our Project Integra (99GSR) and I'm kinda stuck.
Need to get extended studs for the lugs that came with the Bogarts. Bogarts sent 12x1.25 open ended lugs that fit inside the holes on the rim.
I know OEM Honda wheel studs are 12x1.5 so I'm stuck. Where do I get extended studs from? Bogart says they don't carry them.
Anyone know what size (diameter) stud i need? Apparently I need to know the shoulder pitch/width to get the correct stud. I'm assuming i need 2.5-3.0 inch length ones?
Any help would be awesome. Thanks.
http://www.c-speedracing.com/Images/C-speedbanner.gif
-
Ok just found out that its possible to run 87-89 integra REAR OEM studs since they are longer than the 3GEN integra ones up front.
Can anyone verify this? From the looks of things, the stud needs to be about 1/2inch longer than the 3gen ones.
-
Skunk2 sells them
------------------
John
B18C1 Powered 95 Civic EX Coupe
H22A Powered 92 Civic VX Hatch(In the works)
88 CRX HF(Coming soon)
-
Check your email please
------------------
John
B18C1 Powered 95 Civic EX Coupe
H22A Powered 92 Civic VX Hatch(In the works)
88 CRX HF(Coming soon)
-
-
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by JRCivic:
Skunk2 sells the studs... however, I would get the CORRECT lug nuts first before you start all that converting BS. Bogart has 12 x 1.50 nuts... I know because they sent me some for my wheels.
Good luck.
<HR></BLOCKQUOTE>
Thanks for the info. I will do that. Where did you get your extended studs from? and what size/diameter were they?
-
Skunk2 sells the studs... however, I would get the CORRECT lug nuts first before you start all that converting BS. Bogart has 12 x 1.50 nuts... I know because they sent me some for my wheels.
Good luck.
------------------
'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph
