Subject says it all? Where did you guys get yours and for how much? I thought i remembered seeing JRCivic selling them for a good price? Maybe not? Thanks
-Bryan
Printable View
Subject says it all? Where did you guys get yours and for how much? I thought i remembered seeing JRCivic selling them for a good price? Maybe not? Thanks
-Bryan
We dont sell RC's We can if thats what you want. but mostly we sell venom Injectors.
------------------
Matt Hutchins
Http://www.asrimports.com
how much for the venom injectors, how do they compare to the RCs? I know with RC they offer a warranty with free cleaning etc.
Brian,
I was not aware of any "Warranty" program with the RC products... however, I will call Russ tomorrow and check into this for you. I will post my findings.
Call me at the shop if you have questions... (205) 798-0112
Jim
------------------
'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph
Endyn sells the 310's for $288 and the 370's for $298. RC will clean and bench test their injectors at not charge but you have to pay to ship them there.
------------------
98 GS-scR w/ 11psi JRSC, Walbro HO fuel pump, AEM cai, Endyn Kamikazi header, Godspeed testpipe, Thermal Exhaust, Skunk Works cam gears, J&S Ultra safeguard v1, RC 370's, Cartech FMU, Vortech regulator, Apex-i
V-AFC, H&R sports and KYB AGX's,ITR LSD, JR flywheel, Clutch Specialties stage 4, MSD digital 6 & HVC coil, Endyn stepper pulley, NX nitrous and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down.
Best et ==>13.6 @ 103mph w/ 2.3 60ft on Nitto drag radials @ 8psi of boost
Anyone know about the VENOM injectors ?
------------------
96 civic.
<> In the Workz <>
-B18a1,Endyn rods,Endyn pistons (9.3:1)bored 20 over,Federal Mougal Rod Bearings,Honda Main Bearings,Arp rod bolts, Arp head studs,Clutch Specialties Stage 3 Unsprung,Ported Polished Head,Federal Mougal Windshield Wiper Blades(seriously,soon to boost...
They're Ok for normally aspirated engines, but they aren't consistent enough from injector to injector for high output forced induction engines.
Venom's own race car uses RCE's.
Not so hard to believe actually. They were running NOS solenoids on the same car. Wicked Performance and 4NRacer were there and saw them with their own eyes.
------------------
98 GS-scR w/ 11psi JRSC, Walbro HO fuel pump, AEM cai, Endyn Kamikazi header, Godspeed testpipe, Thermal Exhaust, Skunk Works cam gears, J&S Ultra safeguard v1, RC 370's, Cartech FMU, Vortech regulator, Apex-i
V-AFC, H&R sports and KYB AGX's,ITR LSD, JR flywheel, Clutch Specialties stage 4, MSD digital 6 & HVC coil, Endyn stepper pulley, NX nitrous and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down.
Best et ==>13.6 @ 103mph w/ 2.3 60ft on Nitto drag radials @ 8psi of boost
It's a fact. They don't even use their own product.
darksol sells them 80 for one mr rogers nows the good prices