-
1996 block, 64,000 miles (12K@6psi, 8K@10psi). $500.
I wore out the oil control rings and cylinder walls.
Compression test before removal:
#1 = 210
#2 = 210
#3 = 210
#4 = 205
I had a professional engine builder inspect the cylinders. #2 is 0.00015" out of round. #3 is 0.0003" out of round. #1 and #4 are probably in the same condition.
No detonation damage. J&S Safeguard was installed while at 10psi boost. Crank turns smoothly.
Ready for 0.0010" overbore and larger OEM pistons or for a complete build up.
Includes:
- Upper and lower alternator brackets.
- Manifold support bracket and bolts.
- Lower PS bracket.
- Lower timing belt cover and bolts.
- GSR Crank pulley.
- Water pump and pipe.
- Oil seperator box.
- Flywheel.
- Knock sensor.
- Thermostat housing with thermostat and temp. sensor.
- Crank position sensor.
- Dipstick.
- Timing belt.
- Both lower transmission support brackets and bolts.
- Lower exhaust support bracket and bolts.
- Oil pressure sender.
$500.00
Buyer pays for shipping. Freight.
Email [email protected] for pictures. Let me know how fast your internet connection is.
-
consider it sold. Check your E-mail
-
