Is there like a sealer I can put in between areas that are flat surfaced and have no gaskets? I thought I heard something before about a material made of copper you squeeze on and it seals... thanks.
Printable View
Is there like a sealer I can put in between areas that are flat surfaced and have no gaskets? I thought I heard something before about a material made of copper you squeeze on and it seals... thanks.
What areas do not have gaskets ?
I got a copper gasket for my manifold... it has huge ribs to help it seal better.......
Oops, guess I forgot to mention that... between my downpipe and compressor.. and manifold and compressor, I they are both flat surfaced...
what i have always uses....on mine and my suctomers cars.....is ultra-copper....get it anywhere.....works perfect....
RTB high temp silicone.
Andrew
jpcaudill-are you still at 6 psi only
im model'n my car after mark c and you!
he's got a 98 w/ drag n profec
what controller ya got?
how is it working out?
my kit is delayed three weeks now
i should have had it in and up and running by now http://www.hostboard.com/ubb/frown.gif
Awww isn't that touching http://www.hostboard.com/ubb/smile.gif
Anyway... I have no boost controller yet, I'm just controlling it with a bleeder and the wastegate... I've been up to 7 but that's as far as I will go right now. I'm trying to get it a stable 7, right now my car is apart because I had some exhaust leaks so I'm trying to get those squared away... I'll let you know how it is after I'm done.
I hear Mark C is the turbo man... I need to talk with him someday and figure out some things..
Anyway, it took me two months to get my drag kit. It's because turbonetics isn't getting turbos to drag quick enough... If you go with the "B" trim most likely you will get your kit quicker.... that's what I did.
Oh well, lemme know how it goes!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by 4dGSR at work:
jpcaudill-are you still at 6 psi only
im model'n my car after mark c and you!
he's got a 98 w/ drag n profec
what controller ya got?
how is it working out?
my kit is delayed three weeks now
i should have had it in and up and running by now http://www.hostboard.com/ubb/frown.gif<HR></BLOCKQUOTE>
Hey... I hear my name. http://www.hostboard.com/ubb/biggrin.gif
There is a stainless-steel gasket that goes between the manifold and the turbo. I know where you can get it too... Try www.majesticturbo.com . Call em up and tell em you need a "T3 turbine gasket." They got em in stock and they are less than $10.
There is no discharge gasket per se. I didnt use any sealant, but it seems like a good idea. I'll prolly follow BLWNGSR's copper RTV idea next time I take the turbo down.
------------------
Mark - Darth Boost - Turbo Mafia
98 Pearl Black GS-R, DRAG Gen. 3 Turbo
13.3 at 106MPH (22x8x15 slicks on a 100 degree day)