If you have a Walbro fuel pump and it failed on you...instead of just throwing it away, might be worthwhile to send it in for service. According to Walbro, they said 99% of the time, cause of failure is contaminants...I wonder why stock pump doesn't fail in the same tank before ... Here is the message with contacts and all.
> You can forward your pump to:
>
> Mike Wilson
> Walbro Aftermarket Div.
> 6214 Garfield Ave.
> Cass City, MI 48726
> RGA# Diana 110801
>
> Engineering will do an analysis to find the cause of failure. If
found to
> be defective in workmanship and/or material, the pump will be
replaced at
> no charge.
>
> 99% of all failures is because of contamination getting into the
pump. If
> the pump does not meet spec upon receipt, the unit will be cut apart.
If
> contamination is found to be the cause of failure, replacement will
not be
> authorized.
>
> If you have any questions, please let me know.
> Regards,
> Diana Hutchinson
> Walbro Aftermarket Div.
------------------
It's powered by GASOLINE damnit!!!
