Printable View
The bolt that connects the endlink to the lower control arm on the comptech sway bar came loose and the bolt and stepped bushings fell off somewhere. I just called comptech and replacements are enroute, no problem, no charge. Now that's service, it makes the ungodly price of their parts seem worth it all of a sudden!!!!
------------------
'98 GSR JRSC with all sorts of high-performance, high-tech, overpriced stuff packed in all over the place.
http://www.donia.org/clandestine
nexusone: whaz UP!--sounds like shotty shitz ta me!--what da f--k at them prices comptech be charge'n for they rear sway...shitz ya still gots ta punch out yo weld hole ta bolt up that bullshitz! wtf??? mann, of course, ya pay'n for that customer service bullshitz in da first place...but, if they gets ya that shitz likes they say...then its all goodie unless yo rear bar goes rip-rip...
peace.
It it goes rip rip there are large issues than price. In this biz you -usually- get what you pay for, and I don't anyone that has any complaints (here they come, I'm sure) with Comptech products. Everyone I know raves about them. So I'll wait for the fresh bolt to arrive.....
------------------
'98 GSR JRSC with all sorts of high-performance, high-tech, overpriced stuff packed in all over the place.
http://www.donia.org/clandestine
Nexxus, maybe I'm missing something here..but just bolt..go to a hardware store and get a bolt yourself for like five cents.
Why waste even 5 cents when they will give you all the necessary parts for free. Was it the endlink that fell off, if so that would have been hard to find at a hardware store. And the other mounting hardware would have needed to be fabricated like the spacer and the large nut that surrounds the existing nut that is welded on. I would say Lock-tite it this time so that nothing falls off again, I have had no problems at all with mine and it has been on for well over a year now.
Steve
As you can see by my signature, I really like Comptech products. The only problem I ever had was with my muffler exhaust tip. It seems the inside of the tip was oxidizing (rusting) a little bit. I e-mailed Comptech and they said if you live in a high moisture area (Ma.) talk a wire wheel clean the surface rust and clear coat over it. It worked fine, but if it didn't I was prepared to fight for a new one.
------------------
"99" GSR Emerald green sedan-6 psi /JRSC,Walbro 255 lph fuel pump,AEM CAI,Comptech stainless 4-2-1 header,Comptech stainless exhaust,MSD 8.8 ignition wires,Comptech upper and lower strut brace, Comptech sport springs,DC short throw shifter, JR btm, chrome KMC Tarantula wheels on Toyo 205/45ZR 16" Proxes T1S tires, Power Stop cross drilled rotors, Energy Suspension motor mount inserts, Piaa 1700 plantinum driving lights w/Pia Super whites replacement bulbs,walnut woodtrim interior,etc...
Wing/future dark tinted windows and very proud!