Lighted Street Light

Been itchin' to make one of these since I saw that guy with all the ML & the huge building display; finally had some time to make something for myself ....

[img]http://groups.msn.com/_Secure/0SgAmA8sWKGM7jaNupdKG7QDG*sTXrP!AjSeIPZB9VjMnxUZ0h F0!jm7b4p1Q!JUxMy7yAHgtazNvrk9MukrrXbxWIt!DcmmvjKB 88hUCwpURLyVincas2g/StreetLight1.JPG?dc=4675512090139720204[/img]

[img]http://groups.msn.com/_Secure/0SgD9AswWZWM7jaNupdKG7TX5IQUgEnfAQ4*IAu6UVO17ljiWQ svkj*Am4bnGlMLGJMojv2PyDel22VRrlOfTT2kpv0Rke634ge5 5zkUX0*SNlAeEGxKG5w/StreetLight2.JPG?dc=4675512090386781040[/img]

I originally wanted to build the battery pack into the base - but didn't have a clip small enough. I'll probably build some sort of container that will add to the scene (like a postal drop box or something) later.

<font color="#cd6600" size="1">[ February 28, 2005 10:04 PM: Message edited by: Drau ]</font>

Very cool. Now tell me how to do it, lol.

First saw the idea from this guy http://home.comcast.net/~MarvelLegends/; pick the "My Desk" on the left, scroll to the bottom and click on the "How the Mansion was Built" link.

Here's an excerpt:
"The street lamps are finally lit. The street lamps came as a blessing from the Spider-Man 2 movie figs. I looked very hard for street lamps in the proper scale, and never found what I wanted for less than $80 each. These lamps from Toy Biz are perfect. I cut the fake bulbs off with a fine toothed saw, then boil and popped the top section of the lamp to seperate it. I purchased two 3/4" clear acrylic balls, and drilled them out so that I could fit a 5mm LED bulb inside. I sanded the outside with 400 grit sandpaper to frost them. I then threaded the wiring inside the lamp and glued the lamp tops back together and clamped them over night. I wired in the necessary resistors for the bulbs, and threaded them into the middle section of the lamps. Both lamps are wired back to a 12 volt AC converter hidden behind the mansion's front doors."

http://home.comcast.net/~Waiting4MLP...LampWiring.jpg

The only things I did different was to use a XMas ornament (clear tear-drop) instead of the doll-house crystal ball and a battery clip using two AA batteries (in parallel). I also cut out the scroll-work on the lamp post (as seen in the first pic).

<font color="#cd6600" size="1">[ February 28, 2005 10:20 PM: Message edited by: Drau ]</font>

That looks awesome. Would go great with my alley base. [img]graemlins/thumbs_up.gif[/img]

Very cool man! Hurry up and get it into the contest, hurry, hurry! [img]wink.gif[/img]

Quote:

---

Originally posted by TCM Hitchhiker:
Very cool man! Hurry up and get it into the contest, hurry, hurry! [img]wink.gif[/img]

---

<font size="2" face="Verdana, Helvetica, sans-serif">I dont feel right claiming any sort of acclaim for another's idea. Now if I had incorporated it into a dio... that'd be another matter.

Thanks, but I'll bow-out on the entry
[img]cool.gif[/img]

that is beautiful man!

That looks great.

Not sure if it's possible but a necroplasm green light coming through that drain at the bottom would look cool.

man, that kicks 1000 kinds of ass! [img]graemlins/thumbs_up.gif[/img] [img]cool.gif[/img]