Please HELP! I cant start my engine (pic inside)

Well this was last week, I am about to crank her up this weekend if that Jim guy in Bama sent out my cam. http://www.hostboard.com/ubb/smile.gif

http://member.aol.com/aahyjek/mess.jpg

Looks like you got a few bolts loose. Should start right up. http://www.hostboard.com/ubb/smile.gif

------------------
Supercharged GSR Sedan
JRSC 6 psi,AEM CAI, AEM Pulley, AEM Cam gears, RSR header, Greddy PE, Field SFC-VTEC, Neuspeed Race, KYB AGX, Racing Hart C2 (3 piece).

http://www.geocities.com/jamesyun007/canshots.jpg

Pour a bucket of starting fluid into the engine bay.

I drive mine like that everyday...should work fine..after all dont forget its a honda ! http://www.hostboard.com/ubb/biggrin.gif

Check your throttle linkage adjustment...
(It appears to be improperly adjusted)... http://www.hostboard.com/ubb/biggrin.gif

[This message has been edited by Import Tuner (edited November 29, 2000).]

I knew I shouldnt have spun the blower more than 18psi. Anyone wanna buy a 2 inch pulley?

Hehe, ok I am done, I have plenty of work ahead of me. Thanks Mr. King

Looks like a muffler bearing http://www.hostboard.com/ubb/smile.gif

Steve

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Charged R:
Pour a bucket of starting fluid into the engine bay. <HR></BLOCKQUOTE>

Then throw the match...

Tom

Al,

The cam is on the way... I E-mailed you with the tracking number. You will have it on Friday at the very latest.

Looks like everything is under control.

Jim


------------------



'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph

Finally I have closure, now I just need a buyer. Thanks to all who helped putting back this 1.6 to stock. A special thanks to Jim for the countless questions answered and the hard to find stock cam he supplied. BTW, do you still need one?

http://member.aol.com/aahyjek/done1.6.jpg