Attn: Gaugeworks

Do you have any pods for an Integra? One that holds 3 gauges, and is not too flashy, and sort of out of the way?

Thanks.

Well i built an aluminum one that holds 3 .. and put it inplace of the ash tray and lighter. It's way out of the way... but good for information when i need to tune and stuff... Obviously NOT a good location for a guage you want to look at often. I took out where the cruise plug was in the console and made my Boost gauge fit right in there... Nice fit.. and quite easy to read while driving..

Unfortunately i dont have any picture of the setup yet... But keeping the gauges out of sight was all in keeping with my sleeper look. Not sure if that's what you're after, but it is a nice look..

I am currently working with MrRogers on a setup for the integras,,, as well as a AVC mounted in the visor for integras and civics.. i will let you know soon as somethin comes up... thanks brian

------------------
Also known as
Wicked Performance.
If you need somethin, just ask, if i can get it, IT WILL BE AT A GREAT PRICE.

AHHHHHHH YEEAHHHHHH http://www.hostboard.com/ubb/biggrin.gif
Gotta get rid of this BULLSHIT Auto Meter Bezel POS! If you can't tell, I am quite pissed at Auto Meter for making us this crappy assed bezel that doesn't even fit. Hell, I'd sure like to see the test fit car that they used cause it couldn't look like ours.

------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, DC 4-2-1 one piece header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, H&R sports and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down. *ITR LSD, JR flywheel, Clutch Specialties stage 4, NX Gen-X kit and CF diet going on soon....
Best et ==>13.6 @ 103mph w/ 2.3 60ft on Nitto drag radials

what he said

Hey Mr. Rogers, are you refering to that bezel that fits in place of the factory bezel and it has those two pods built into it? I haven't heard a complaint from anyone about this bezel.

Hit me up about this issue....

------------------
It take a Nation of Millions to hold Us Back!!!

http://www.bocajuniors.com.ar/escuani.gif
C-SpeedRacing

[This message has been edited by MouhadIb (edited December 05, 2000).]

man Mr. Rogers is SOOO right. I JUST got the bezel delivered to me @ work and the quality looks like ?ss.

I think that I will send this thing back now that I have also seen pictures of the Mr Roger's bezel fitment and just get a pillar gauge! Sheesh...what quiality. http://www.hostboard.com/ubb/rolleyes.gif
Just DIABOLICAL!!

------------------
It take a Nation of Millions to hold Us Back!!!

http://www.bocajuniors.com.ar/escuani.gif
C-SpeedRacing

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Mr Rogers:
AHHHHHHH YEEAHHHHHH http://www.hostboard.com/ubb/biggrin.gif
Gotta get rid of this BULLSHIT Auto Meter Bezel POS! If you can't tell, I am quite pissed at Auto Meter for making us this crappy assed bezel that doesn't even fit. Hell, I'd sure like to see the test fit car that they used cause it couldn't look like ours. <HR></BLOCKQUOTE>

Wonder over to www.ClubSI.com and do a search for "bezel" without quotes in the GroupBuy forum. There is a guy there that makes custom bezels out of fiberglass long before AM came out with theirs. I think he charges around $100 but it is hand hade to order.

...Steven

No go on the search but I remember someone making the pod awhile back. I thought someone here was making them too? I can't remember but if anyone finds the link, hook us up.

------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, DC 4-2-1 one piece header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, H&R sports and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down. *ITR LSD, JR flywheel, Clutch Specialties stage 4, NX Gen-X kit and CF diet going on soon....
Best et ==&gt;13.6 @ 103mph w/ 2.3 60ft on Nitto drag radials

You guys should call or write to Autometer and complain about the craftsmanship. I was pretty happy with the pod they made for the A pillar in my civic. The color is a near perfect match and so is fitment.

Tell them the problem. This way they can make the appropriate corrections to their product run and make it right. I've found they are pretty easy to deal with.


------------------
Marc
1997 Civic EX
The supercharger is gone. Get ready for the turbo.