Best cam for GSR

What is the best cam for a GSR all motor?? anyone

------------------
94 integ ls, auto, JRSC, boost 8psi(CRV pully). apxi cat back no cat, RSR gsr header4-2-1,AEM cam gear, apex S-afc, apex rev-speedmeter, MAX speed intake.

toda spec b cams give very healthy gains across the entire rpm range . j-spec civic typer cams pull good numbers too . there is a site dedicated to honda dyno graphs . if i can find it ill post the link here . i think i found it through temple of vtec's site .

------------------
99' GSR / JRSC @ 6psi
-JR MAP & BTC
-Walbro 342
-Comptech exhaust & intake/icebox
-Comptech/Koni coilovers
-Mugen 22mm rear sway bar

here it is


http://www.geocities.com/dynocenter/

------------------
99' GSR / JRSC @ 6psi
-JR MAP & BTC
-Walbro 342
-Comptech exhaust & intake/icebox
-Comptech/Koni coilovers
-Mugen 22mm rear sway bar

I like Crower http://www.hostboard.com/ubb/biggrin.gif

------------------
1992 Red Honda Civic CX Hatch Back
B18C1 hybrid
Drag Gen III turbo - in the process
jrsc 11psi- 12.58 @ 110.5 mph
Powered by: SPEED PRO

1998 Super Sonic Blue Integra GS-R (completely stock now)
With jrsc at 6psi best 1320: 13.78 @101.43 on drag radials

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by gsrev:
I like Crower http://www.hostboard.com/ubb/biggrin.gif<HR></BLOCKQUOTE>

Agreed. Listen to that sick idle on HX_Guy's B20 and your mind will be made up http://www.hostboard.com/ubb/smile.gif

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by AshlandSi:
Listen to that sick idle on HX_Guy's B20 and your mind will be made up http://www.hostboard.com/ubb/smile.gif<HR></BLOCKQUOTE>

Come to think of it, your Vtec motor won't sound like that since Crower probably doesn't make the standard lobes nearly as aggressive.

------------------

My first question would be what do you want to do with them...drag, autocross, etc...and how much $$$ are you willing to spend??...and what kind of end HP result are you looking for...there are some good choices out there it just depends on what you want to do with your motor and what your final goals are??

------------------
John
B18C1 Powered 95 Civic EX Coupe (sold)
H22A Powered 92 Civic VX Hatch(In the works)
88 CRX HF(Coming soon)

ok, i like street race. I like to go out there and have a four cyl. car ALL motor and spank some V8 car, trying to run 14 or high 13 1/4 mile

------------------
94 integ ls, auto, JRSC, boost 8psi(CRV pully). apxi cat back no cat, RSR gsr header4-2-1,AEM cam gear, apex S-afc, apex rev-speedmeter, MAX speed intake.

gotboost....what car is the GSR motor in??...I hope you are going to tell me its in a light civic hatch...if you dont you will need much more than cams to hit low 14's/high 13's all motor
------------------
John
B18C1 Powered 95 Civic EX Coupe (sold)
H22A Powered 92 Civic VX Hatch(In the works)
88 CRX HF(Coming soon)

[This message has been edited by CivicR (edited October 15, 2001).]

you will need to upgrade springs to safely run any of the more agressive cams (crowers included). some people have told me they wont be needed if stock redline remains the same , but one over rev could create disaster .

------------------
99' GSR / JRSC @ 6psi
-JR MAP & BTC
-Walbro 342
-Comptech exhaust & intake/icebox
-Comptech/Koni coilovers
-Mugen 22mm rear sway bar