Dynamic Design

Has anyone ever had any dealings with Dynamic Design Motorsports in Canoga Park, CA? I am going through a terrible experiance with them on a turbo kit.

------------------

I don't know of a Dynamic Design Motorsports, but I do know of a Dynamic Motorsports that is around Sacramento. They do good work. Supercharged my friend's GSR and also Greddy Turbo'd another friend's Type R. Problem is they take a long time.

------------------
6 psi JRSC GSR: GSS-317, 3" intake -> 217 hp/155 ft-lbs.
New: BTC, MAP controller, and stock timing!
Soon: Endyn stepper?

Is the number there 818-998-4000? I've been dealing with a guy named Mony.

------------------

That doesn't look like the right area code. Maybe we're talking about different places.

------------------
6 psi JRSC GSR: GSS-317, 3" intake -> 217 hp/155 ft-lbs.
New: BTC, MAP controller, and stock timing!
Soon: Endyn stepper?

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by hid-perf:
Has anyone ever had any dealings with Dynamic Design Motorsports in Canoga Park, CA? I am going through a terrible experiance with them on a turbo kit.
<HR></BLOCKQUOTE>

If it's concerning a Rev Hard kit, expect a long wait.


------------------
[email protected]
http://www.importparts.com/
Sales: 800.662.9552 - Tech Support: 626.359.8832

It's not really about Rev-Hard. I bought a used kit for my 96 Accord from them (I know, I shouldn't have bought a used kit to begin with) and they assured me that is was a "Show quality street kit that was on a show car that never seen any track use". Once I got the kit, it was OBVIOUSLY a RACE kit (not that I mind) that was ABUSED and didn't even fit my car!!! The manifold and intercooler piping were for something else and wouldn't even fit. I don't know what the manifold fits. I tried a H22, F22 and several other heads and it wouldn't even bolt up. I've been trying to get this whole deal fixed for over a month now and they keep avoiding my calls. I sent my manifold and piping back and they assured me that they would take care of the problem and now I'm out a manifold and piping.

------------------

Those guys are as shady as they come. BEWARE! I've heard some awful stories about them from both customers and other dealers. Somebody outta shut those farmers down.

------------------
Marc
Want to know why I got rid of the JRSC? http://crx.honda-perf.org/horror/jrsc.html

Coming soon: A new member to the 12 second club.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by hid-perf:
It's not really about Rev-Hard. I bought a used kit for my 96 Accord from them (I know, I shouldn't have bought a used kit to begin with) and they assured me that is was a "Show quality street kit that was on a show car that never seen any track use". Once I got the kit, it was OBVIOUSLY a RACE kit (not that I mind) that was ABUSED and didn't even fit my car!!! The manifold and intercooler piping were for something else and wouldn't even fit. I don't know what the manifold fits. I tried a H22, F22 and several other heads and it wouldn't even bolt up. I've been trying to get this whole deal fixed for over a month now and they keep avoiding my calls. I sent my manifold and piping back and they assured me that they would take care of the problem and now I'm out a manifold and piping.
<HR></BLOCKQUOTE>

Call them and ask for refund. If they refuse, call your credit card company and have them handle it for you. You shouldn't buy a turbo kit used and you shouldn't have to put up with bad service.


------------------
[email protected]
http://www.importparts.com/
Sales: 800.662.9552 - Tech Support: 626.359.8832

I know I shouldn't have bought a used kit, but it sounded like a good deal until I got it. I've already talked to my credit card company and it's being handled right now. I just can't believe a company like that would straight up lie to someone. I guess they can't do business any other way.

------------------

You're going to run into a lot of "companies" like that. The best way to find a good vendor is to ask a friend who has dealt with one.

------------------
[email protected]
http://www.importparts.com/
Sales: 800.662.9552 - Tech Support: 626.359.8832

Bring that thing over to my shop...

I got the best welder, fabricator, Turbo guy, Engine Builder I know of..

He is great. I will sign a contract telling you I will finish it by X date, or I pay you a discount back to you..

As long as I don't have to wait to get a manifold for it, it will be quick,.

Jeff

------------------
www.importreview.com all the dyno charts you need to make informed decisions...

I appreciate the offer but I'm halfway across the country.
I have access to a guy who does great fab work. I wish I would have used him instead of the "deal" I got.

------------------