Printable View
I was asked to post these so here they are.
crooked exhaust
http://www.geocities.com/Tokyo/9201/turbo99/turbo07.jpg
extra bend and the Type R swaybar
http://www.geocities.com/Tokyo/9201/99gsr/99gsr17.jpg
dunno if u can really see the clearance for the turbo
http://www.geocities.com/Tokyo/9201/turbo99/turbo04.jpg
try here
http://www.geocities.com/Tokyo/9201/turbo99/turbo02.jpg
------------------
woong
1999 GReddy turbo DC2
nice setup .. are you running the front mount from greddy also??
off subject but damn those pics are clear .. what kind of digicam are u using?
------------------
turbob18C'd firstgenGSR
Thanks, woong.
nice car!!!!
Yup, I'm running the GReddy large front mount with this, I'll try to get a pic of my friend's DRAG2 intercooler vs mine with our bumpers off one of these days, as for the pics, a friend of mine took those pics for me when he was there, I think it was a Fuji one, he said it was like $500, its a really nice camera but its off my shopping list for now =)
but in the meantime, enjoy
http://www.geocities.com/Tokyo/9201/turbo99/turbo01.jpg
------------------
woong
1999 GReddy turbo DC2
[This message has been edited by woong (edited March 30, 2000).]
[This message has been edited by woong (edited March 30, 2000).]
some for you to enjoy also http://www.hostboard.com/ubb/smile.gif
http://www.geocities.com/dks1021/nidoran/turbogsR.jpg
scanners suck don't they? i gotta get myself a digicam now after seeing how clear your pics are http://www.hostboard.com/ubb/smile.gif
------------------
turbob18C'd firstgenGSR
Looks good all. How do you like that Hiper exhaust? Any problem with scraping on the ground? I am looking to replace my exhaust with something a little more free-flowing.
Here's my pics. http://www.hostboard.com/ubb/smile.gif
http://albums.photopoint.com/j/View?...396&Sequence=0
http://albums.photopoint.com/j/View?...999&Sequence=1
We got a pretty good scanner here at work.
------------------
Mark - Darth Boost - Turbo Mafia
98 Pearl Black GS-R, DRAG Gen. 3 Turbo
13.2 at 114MPH (GTech/Pro w/Drag Radials)
is that a 92-93 GSR also? is that a DRAG kit? i had bought a DRAG kit for my car but returned it right away .. the intercooler was TINY .. and overall the kit just sucked .. i like DRAG kits but they suck for 90-93 tegs .. had the swervy piping and everything .. yuck!
did u ever time your second gen teg with the turbo? how many lbs?
yea scanners suck hehe here's how my old car came out with the scanner =)
http://www.geocities.com/Tokyo/9201/...ar/woong02.jpg
------------------
woong
1999 GReddy turbo DC2
Hey Mark, why do you have 94-94 GSR's on your car? If you still have the pics of my motor, post one for me! I wanna be like you guys.
------------------
DRAG...
Power is everything
I like the Hiper exhaust, its something different but its on the loud side, if you commute on the freeway alot then it gets annoying since it just drones, even with the turbo on, I actually dont have much scraping problems but the only thing that gets annoying is the fact that it vibrates against my lower tie bar and so I had to wrap a piece of hose around the bar, but it got hard and started banging again, so I just took a piece of silicon hose and wrapped thermo tec heat tape around that, hopefully it wont get hard =)
------------------
woong
1999 GReddy turbo DC2
I have apex Dunk adn on the freeway it sounds stock at cruising speed so i like that. Gotta love turbo! But i wanna upgrade to a 3 inch apex RS muffler if you look at the muffler it goes straight through and has no bends. i am over the big can looking exausts u just get pulled over to much