Move to arctic?
Printable View
Move to arctic?
I was thinking glue, too-
or some silicone caulk.......but that might smell for a while
<font size="2" face="Verdana, Helvetica, sans-serif">Thanks, EQ but I'm looking for something that won't melt. [img]wink.gif[/img]Quote:
Originally posted by ?EQ?:
Move to arctic?
Thanks for the suggestions. Calk and glue stick both sound like good possibilities. I've worked with calking but it's really sticky and hard to work with. But it does have the right texture... Any others?
There's this stuff that you can find in craft stores... it's a really thick glss varnish. It is used to seal tabletops, etc., called "Pour-On High Gloss Finish"
It's really, really thick, but still viscous. You could pour some of that in a cup, and let it sit out for a few minutes, watching it... until it got thicker, without setting. When it gets to a goopy stage, you could pour the tentrils down off your top base, and let it hang down like the icicles. Or, wait until it is starting to set, and drip it and pull it down with a toothpick or something.
That stuff dires totally clear and shiny, you can even add pigment to it. It would look really good as icicles. There may be clear resins that would work similarly.
Also, check into that glue called GOOP. I know it's really thick and dries clear, that could work too...
I'd mix up some kind of 2-part epoxy or something... mix until it has the right consistancy... dribble it off and let it dry.
You could clip off any sharp edges or "strings", then take a small brush, a new batch of thinner epoxy, and smear some on the icicles... the bottom would have that round drip look then. [img]smile.gif[/img]
pairadocs & Baimun,
Great suggestions. I was thinking epoxy but was hoping for something thicker. I'll probably try both of those, along with some of the other suggestions until I find something that works.
Thanks everone for your input. [img]graemlins/thumbs_up.gif[/img] It's a big help.
lay out where u want the icicles with fishing line then apply drops of casting resin to the top of the line...and let it drip.
works like a charm
christ boner not everyone's a man o' miracles like you [img]wink.gif[/img]
but yeah, martha steart's tip could work, or for a crappier [img]wink.gif[/img] probably only semi-transparent way, the hot glue would probably be a way to go
<font size="2" face="Verdana, Helvetica, sans-serif">That's a great idea too! Just make sure you get CLEAR casting resin! [img]wink.gif[/img]Quote:
Originally posted by bonedust:
lay out where u want the icicles with fishing line then apply drops of casting resin to the top of the line...and let it drip.
works like a charm
<font size="2" face="Verdana, Helvetica, sans-serif">That's a great idea too! Just make sure you get CLEAR casting resin! [img]wink.gif[/img] </font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yeah, I like that idea too. I've had some experience with resin but it's super expensive. What brand do you guys use - got a link?Quote:
Originally posted by pairadocs:
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by bonedust:
lay out where u want the icicles with fishing line then apply drops of casting resin to the top of the line...and let it drip.
works like a charm
Take glue sticks from one of those hot glue guns.
Gently with a lighter melt it, and let it drip onto whatever you want. Takes time to practice the right amount so it drys as it falls.
Or use Enamel varnish. Take about a teaspoon of it, and let sit in the open air for about an hour. Then take the half dried varnish which is like moosh by then and let it drip where ever.
I dunno a clear brand... the stuff I use dries white.
I've seen clear casting resin at Hobby Lobby and Michael's - It costs like $15-20 for a container...
Thanks Docs. I've been getting mine at a hobby shop - which would explain the price. I'll check Michaels and LL. [img]graemlins/thumbs_up.gif[/img]
I would use this stuff. Its good for Water, Ice and Fire effects:
http://www.hobbylinc.com/htm/woo/wooc1212.htm
<font size="2" face="Verdana, Helvetica, sans-serif">not really a brand as such...........Quote:
Originally posted by madadman:
Yeah, I like that idea too. I've had some experience with resin but it's super expensive. What brand do you guys use - got a link?
but I seem to have an endless supply~
<font size="2" face="Verdana, Helvetica, sans-serif">not really a brand as such...........Quote:
Originally posted by Street Worm:
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by madadman:
Yeah, I like that idea too. I've had some experience with resin but it's super expensive. What brand do you guys use - got a link?
but I seem to have an endless supply~</font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yeah? Just wait till your my age. [img]wink.gif[/img]
<font size="2" face="Verdana, Helvetica, sans-serif">Thanks Guyver! I'm gonna give that a try. [img]graemlins/thumbs_up.gif[/img]Quote:
Originally posted by Guyver:
I would use this stuff. Its good for Water, Ice and Fire effects:
http://www.hobbylinc.com/htm/woo/wooc1212.htm
I'm designing a new base for a couple of my Conan figures and want to make icicles hanging from a ledge. Kind of like this:
http://img.photobucket.com/albums/v2...127716-001.jpg
Anyone know of a material that will appear icy? I could sculpt it with Sculpey and paint it white but I'm hoping to make it transparent. Any help would be appreciated. [img]smile.gif[/img]
Melted hot glue sticks? I dunno, just a suggestion, lol.