How'd the rest of the meet go fellaz? Anyone else show? Get both cars done? geez i wish i coulda stayed for the front springs and shocks as well. hope yall had some fun!!!
Printable View
How'd the rest of the meet go fellaz? Anyone else show? Get both cars done? geez i wish i coulda stayed for the front springs and shocks as well. hope yall had some fun!!!
Yea, well, I made it home ok! [img]biggrin.gif[/img]
We figured it was about 2 & 1/2 hrs per car. Mine is questionably too low... but the other looks great. I bet it felt good driving it home!
I had to stop, and then slowly easy up the driveway to make sure it didn't scrape. lol.
Drove fine, the bumps were a little loud, but handled great.
I had a blast, and, even if I don't keep the set up, it was worth just hanging out and getting something done together. I'm off to hawk a kidney, and the we can discuss an exhaust overhaul meet! [img]biggrin.gif[/img]
Thanks again for all the help guys!
Well I was able to get all the cabling complete so i can install my new amp once that arrives. But on the way home last night, i hit a bump and my head unit stopped working. Its the wierdest thing but i get a Mute message on the screen which is suppose to be a feature with cell phones but i dont have my phone connected to the deck so not sure whats wrong with this.
Well I was going to post something Sunday night but I was to tired after all the work we did. Needed to soak in a hot tub for a while, my back was killing me. Anyway we finished both cars, Alex's car we replaced all the shocks and springs and also put the camber kits in. With Knoi's we just did the springs and shocks, his sets about the same as mine now. It was was really great the way everyone pitched in to do the work on them, had four people working at all four corners on Alex's car at the same time. We slowed a bit with Knoi's. It was a lot of fun for all of us. Poor Thomas just got to work on his car only pretty much, but besides the stereo work he relocated his license plate which I helped him with. Those who attendanted Sundays meet were: Ed and his girl friend, Khoi, Alex, Thomas, Sandy and Dennis and finally Geo.
Here's a couple of pictures from Sundays Meet.
http://img418.imageshack.us/img418/2...5meet018mm.jpg
http://img418.imageshack.us/img418/4...5meet028gb.jpg
It was getting pretty dark when I took these.
Geo
President
Team Sol of Washington
http://img275.imageshack.us/img275/5430/banner38qx.jpg
That bracket for his license was pretty slick. What did that run you anyways?
I meet my first speed bumps today, and only found one set that didn't like me no matter how slow I went. I hope I'm not scraping anything important.... [img]redface.gif[/img]
Its definately more bouncy than my stocks, but the side-side squishiness is gone. I'm going to be calling around tomorrow about alignments. Any recomendations anyone?
Either today or tomorrow I am going to slap in some washers in the back, I figure one thicker one per bolt.
<font size="2" face="Verdana, Helvetica, sans-serif">Alex does it look tilting in at the top now that it settled down some? It sure didn't when we looked.Quote:
Originally posted by A.Oster:
That bracket for his license was pretty slick. What did that run you anyways?
I meet my first speed bumps today, and only found one set that didn't like me no matter how slow I went. I hope I'm not scraping anything important.... [img]redface.gif[/img]
Its definately more bouncy than my stocks, but the side-side squishiness is gone. I'm going to be calling around tomorrow about alignments. Any recomendations anyone?
Either today or tomorrow I am going to slap in some washers in the back, I figure one thicker one per bolt.
Geo
President
Team Sol of Washington
http://img275.imageshack.us/img275/5430/banner38qx.jpg
It was a great meet for me. I got the car levelled out and $2.59 gas instead of the $2.85 that it was in Olympia. The ride home felt a little loose as the car didn't seem to want to track too well. The bumps in the road still sounded loud and as 'harsh' as the bad stuff we just pulled but I didn't feel like I was on the verge of losing control with the Tokico setup that I had felt before.
Went to Schwab yesterday and had them do an alignment. The camber on the front were well within spec and they didn't really tweak that. Toe-in was way off however. The left was at -0.41 and the right -0.40. It is now at 0.01 and 0.02 respectively and the handling is much better. The steering wheel is also correctly centered now too. [img]graemlins/thumbs_up.gif[/img]
The back end was another issue. The camber on the left was ok at 0.1 but the right rear was at -1.8. They said they couldn't adjust that wheel and that I needed a new adjustable arm for 67.83 and 35.00 dollars labor to get that into the -1.5 to 0.5 range. I'm almost thinking they have a problem with that damn alignment machine because my sister's Accord wagon had problems with the rear camber too, if I remember correctly. The toe was also off for the rear to the tune of -0.26 on the left and -0.04 on the right. They are at 0.06 and 0.05 now and I'm thinking I might forgo the adjustable arm unless someone can convince me that a -1.8 in a range of -1.5 to 0.5 is going to cause mucho problems for me down the road and the fix is worth the expense.
Thanks Geo and Alex for the assistance with the swap out! [img]biggrin.gif[/img]
<font color="#a62a2a"><font size="1">[ October 18, 2005 11:25 AM: Message edited by: BiffStroganoffsky ]</font></font>
<font color="#a62a2a" size="1">[ October 18, 2005 11:26 AM: Message edited by: BiffStroganoffsky ]</font>
Knoi, we'll need to add some washers to bring it into specs is all on that one wheel. It sure didn't look bad when I checked it. I forgot to show you what you have to do on that, I only told Alex I guess.
Geo
President
Team Sol of Washington
http://img275.imageshack.us/img275/5430/banner38qx.jpg
Thanks! My tinkering is slowing down due to funds, but here is the list of to do's: Wheels, exhaust, paint, JDM visors, Maplights, custom tails, and a shiny new header.
Thats pretty much the list so far. But I'm not just broke, I'm broken. So all will have to wait a long while. I was thinking about rattle caning the whole car, one small section at a time a nice dark green. I did my own spoiler and it turned out good. (not great, but good) All things considered...
BTW, I forgot to remove the pop can when I backed out; it didn't make it.
<font color="#a62a2a" size="1">[ October 19, 2005 01:25 AM: Message edited by: A.Oster ]</font>
Shooting the car is nothing. It's the prepping and finding a suitable spray booth that's a pain.
Heck I can make a booth & do the prep. Its definately the application that will be lacking for me.
Yea, I added one per bolt today before I took it in to t&t tire (on so. tac way)... they guy was realy impressed with how close we had it already, but they aligned it and got it set.
http://i6.photobucket.com/albums/y20...rberg/scan.jpg
I have new pics up too!
http://photobucket.com/albums/y201/Osterberg/carpics/
<font color="#a62a2a" size="1">[ October 19, 2005 01:25 AM: Message edited by: A.Oster ]</font>
<font size="2" face="Verdana, Helvetica, sans-serif">Nice pixs there Alex.Quote:
Originally posted by A.Oster:
Yea, I added one per bolt today before I took it in to t&t tire (on so. tac way)... they guy was realy impressed with how close we had it already, but they aligned it and got it set.
I have new pics up too!
http://photobucket.com/albums/y201/Osterberg/carpics/
Geo
President
Team Sol of Washington
http://img275.imageshack.us/img275/5430/banner38qx.jpg
You may be lacking some more money too. I think you were just outbid on the license lights on ebay. What organ(s) are you selling to buy that? [img]rolleyes.gif[/img]
Back on topic (somewhat): I shoulda taken a peek at my exhaust while I was under the Sol torquing the bolts but it was getting a little late and Mrs. Geo had dinner waiting her crew. Anyhow, you all got to hear how loud the bugger is. To me it seems to sound like a leak before the 'Silence' (hah, yeah...right) muffler but I wonder what you guys thought. Did it seem like the noise was coming out the exhaust tip to you?
If I need a new exhaust, what brand do you think is a good bolt-on system/name? I'm thinking more of a stock or quieter note and really not rice/performance per se. And no humungous 'fart pipe' out the back either.
Look into a DOHC VTEC system, it's bigger then the Si's and it's all stainless steel (no rust). It's prefect for a N/A car and quiet too, with little or no loss of bottom end like the aftermarket ones because of the size. Something to think about anyways. O and it bolts right up with no changes, the only other change you may want is to change the cat to a DOHC VTEC one (free'r flowing then the S or Si one.
Geo
President
Team Sol of Washington
http://img275.imageshack.us/img275/5430/banner38qx.jpg
<font size="2" face="Verdana, Helvetica, sans-serif">I'm selling a lot of stuff recently.Quote:
Originally posted by BiffStroganoffsky:
You may be lacking some more money too. I think you were just outbid on the license lights on ebay. What organ(s) are you selling to buy that? [img]rolleyes.gif[/img]
But as for those... I'm not sure if I'm going all out or not yet...
Then again, I am a sneaky little monkey...
http://www.shawnimals.com/images/dow...ures/ninja.jpg
<font color="#a62a2a" size="1">[ October 19, 2005 11:07 PM: Message edited by: A.Oster ]</font>
well i dont know of any aftermarket exhausts that are cheap, straight bolt on, and sound decent at the same time. I've done an oil change on this 01+ civic ex that had a flowmaster muffler and custom piping that sounded REALLY nice. VERY deep toned. i couldn't tell you how it sounded at higher rpms since i'm only in a small parking lot while moving these cars and its a customer's car so i dont get to have too much fun with the cars. But, all n all, to get one put on, i dont see it costing too much more than $200 if even that. Another name brand to keep in mind would be magnaflow and flowmaster. I'm not entirely too much of a fan of stock mufflers. they just give me enough of a grumble and i figure, if imma spend money on replacing a part of my sol, i might as well upgrade right?
Oh Geo, you should be a magnet for screwdrivers. You should have an extra Craftsman #2 philips in your tool chest somewhere. I'm pretty sure I last saw it on the garage floor near your floor standing tool chest. Please don't bend that into an S and I will pick it up at the next meet or something.
<font size="2" face="Verdana, Helvetica, sans-serif">Did you leave one? I'll be sure to take care of that, and this time I'll watch while YOU can take it back to Sears bent into a "S". Hope that same clerk is there. Hee, hee.Quote:
Originally posted by BiffStroganoffsky:
Oh Geo, you should be a magnet for screwdrivers. You should have an extra Craftsman #2 philips in your tool chest somewhere. I'm pretty sure I last saw it on the garage floor near your floor standing tool chest. Please don't bend that into an S and I will pick it up at the next meet or something.
Does this look like it?
http://img140.exs.cx/img140/9749/extention16zr.jpg
Geo
President
Team Sol of Washington
http://img275.imageshack.us/img275/5430/banner38qx.jpg
Knoi, the only one I found was a #1 phillips, it that the one?
Geo
President
Team Sol of Washington
http://img275.imageshack.us/img275/5430/banner38qx.jpg
I may have my numbers wrong. It's the one that's about five and one-half to six inches long overall. It's not the 'standard' size but one down. I can't remember if the 'standard' is #2 or if it's the one one size smaller. If you can keep it with the mysterious black screwdriver that no one claims, I can make a visual identification at the next meet.
<font size="2" face="Verdana, Helvetica, sans-serif">That's it then Knoi, I'll bring it to the next meet. Someone put it into my toolbox, but it wasn't me, probably my son did.Quote:
Originally posted by BiffStroganoffsky:
I may have my numbers wrong. It's the one that's about five and one-half to six inches long overall. It's not the 'standard' size but one down. I can't remember if the 'standard' is #2 or if it's the one one size smaller. If you can keep it with the mysterious black screwdriver that no one claims, I can make a visual identification at the next meet.
Geo
President
Team Sol of Washington
http://img275.imageshack.us/img275/5430/banner38qx.jpg