Altec 511E's on the Bay

Printable View

January 25th, 2012, 03:44 PM
Altec Best

Altec 511E's on the Bay

Somebody grab these !

ALTEC 511E HORNS | eBay
January 25th, 2012, 10:23 PM
Steve Mac

Re: Altec 511E's on the Bay

Is it my computer or does the third pic enlarged look as if one of the joints is split?
They look just like the pair I have. With throats rougher than Louis Armstrong's.
January 25th, 2012, 11:03 PM
speakerdave

Re: Altec 511E's on the Bay

It does look like the top part of the center fin on that horn is offset, maybe having absorbed an impact. The top and bottom dividers are not joined by welds, but rather there is a gap that is filled with aqauplas.
January 26th, 2012, 12:22 AM
A7fan

Re: Altec 511E's on the Bay

Nice and look to be factory made. Four days left on the auction. I curious what they will finally sell for.
January 26th, 2012, 06:49 AM
gvasale

Re: Altec 511E's on the Bay

I enlarged & sharpened one of the photos. They are welded, not completely, open in the rear of the dividers. IRC, most were done the same way. Quality of the photo from the bay is far from teriffic.
January 26th, 2012, 09:29 AM
bowtie427ss

Re: Altec 511E's on the Bay

The extra holes won't add to their value, and turn me off a good bit. Apparently grampa needed something to test out the new Black & Decker on.:D
January 26th, 2012, 11:25 AM
Altec Best

Re: Altec 511E's on the Bay

Quote:

Originally Posted by Steve Mac

Is it my computer or does the third pic enlarged look as if one of the joints is split?
They look just like the pair I have. With throats rougher than Louis Armstrong's.

Agreed Steve ! My 3 pair needed some TLC as well. But we all know Altec went through some quality control issues.

Quote:

Originally Posted by bowtie427ss

The extra holes won't add to their value, and turn me off a good bit.

That actually bothers you ? It doesn't bother me a bit. IMO 511E's at least some or most have seemed to be just modified 511B's.At least the mounting flange anyway.I like the extra holes makes them more versatile,so you can use a Small or Large format with them.Once you mount the 288 you won't see the other holes .I have pairs with them and without them and that didn't deter me when purchasing them.I bought them to use and wasn't concerned with the value for resale purposes. :cool:
January 26th, 2012, 01:01 PM
bowtie427ss

Re: Altec 511E's on the Bay

I'm actually referring to the randomly drilled holes on the mounting flanges, not the driver flanges, the small format driver holes may well be stock. They're not symmetrical in location and don't even land on the centerline of the factory holes, just sad.

I'm really referring to the cosmetics including the black overspray which cannot be properly corrected without damaging/re-doing the factory finish.

For me, and the collectors i know this ruins much of their value as collectibles. Sonically, they're 511's and if i were going to spend a few hundred or more on a pair of horns, it wouldn't be 511's of any throat size short of a pristine unmolested pair of 511E which these sadly are not.
January 26th, 2012, 02:33 PM
Altec Best

Re: Altec 511E's on the Bay

Quote:

Originally Posted by bowtie427ss

For me, and the collectors i know this ruins much of their value as collectibles. Sonically, they're 511's and if i were going to spend a few hundred or more on a pair of horns, it wouldn't be 511's of any throat size short of a pristine unmolested pair of 511E which these sadly are not.

As they say To each his own ! Try and find a pair of pristine unmolested 511E's anywhere these days ? :wink2: They are just not that common or available.I think I have seen about 5 pair in the last 5 years or so anywhere.And I have 3 of them ! :biggrin2:
January 26th, 2012, 03:48 PM
bowtie427ss

Re: Altec 511E's on the Bay

Quote:

Try and find a pair of pristine unmolested 511E's anywhere these days ?

Most of them now belong to the collectors, condition being the majority of everything. And, of course when we're talking about something that multiple forum members own, they're not quite rare. Not yet.

Quote:

As they say To each his own !

I could not agree more.:D

For 300+, i'll gladly cut and re-weld a pair of 511b's. Damped, painted, and a new pair of foilcals from that fella on ebay, they'll fool 90% of the pocket internet experts, and i'll still have enough cash leftover to take my GF out for an evening to remember. :D
January 26th, 2012, 06:23 PM
Altec Best

Re: Altec 511E's on the Bay

Quote:

Originally Posted by bowtie427ss

For 300+, i'll gladly cut and re-weld a pair of 511b's. Damped, painted, and a new pair of foilcals from that fella on ebay,

What like these ? :biggrin2: These I got to restore a couple of pair that I have.And that I'm going to use on my project.They are going to look like they just left the Altec plant...:p

http://www.hostboard.com/forums/hbmc...2012/01/31.jpg
January 26th, 2012, 07:07 PM
David Yost

Re: Altec 511E's on the Bay

Go for serial numbers 00001 and 00002 while you're at it!
January 26th, 2012, 07:12 PM
Altec Best

Re: Altec 511E's on the Bay

Quote:

Originally Posted by David Yost

Go for serial numbers 00001 and 00002 while you're at it!

Nope !!! I already have serial Numbers on my horns.The original stickers aren't in great shape.So when I finish restoring them I will use the new stickers along with their original serials, 00404,00411,00215,00225 ! They aren't FAKE ! :wink2:

My horns aren't for sale nor will they be !! Ever ! Like Nipper says when I'm gone someone will be selling my gear for $60K :biggrin2:
January 26th, 2012, 08:06 PM
bowtie427ss

Re: Altec 511E's on the Bay

Quote:

Originally Posted by Altec Best

What like these ? :biggrin2: These I got to restore a couple of pair that I have.And that I'm going to use on my project.They are going to look like they just left the Altec plant...:p

http://www.hostboard.com/forums/hbmc...2012/01/31.jpg

Those are the ones!

I'm impressed with all i've seen so far, he makes good stuff.
January 26th, 2012, 08:12 PM
Altec Best

Re: Altec 511E's on the Bay

Quote:

Originally Posted by bowtie427ss

Those are the ones!

I'm impressed with all i've seen so far, he makes good stuff.

Yes he does ! Rudy makes some real nice stuff, looks like the real thing.Damn if I can tell the difference.He's made some other stuff for me as well. He makes a lot of different stuff too.Altec,JBL,etc...