-
Well, Since this was my first time running my car in the 1/4 mile, I think I did okay, but I think something is wrong with my car, it should be alot faster, or maybe I just can't drive, here's my setup: '97 JRSC GSR 6psi, DC 4-1 header, test pipe, greddy PE exhaust, Akimoto intake(dirty ass K&N filter)AEM cam gears, Apexi VAFC, 12 pound flywheel, act organic street disk stock pressure plate, 17" konig monsoons with Yoko paradas. The first run I got nervous and couldn't get traction till I shifted into 3rd, the second run I did a little better, but I'm still embarassed with these timeslips..
1st run:
R/T 1.034
60' 2.563
330 7.059
1/8 10.471
MPH 72.63
1000 13.348
1/4 15.759
MPH 93.56
2nd Run:
R/T .827
60' 2.690
330 6.834
1/8 10.181
MPH 73.49
1000 13.043
1/4 15.457
MPH 93.34
Any suggestions?? Thanks
------------------
'97 Integra JRSC GSR - Lots of Mods
'95 Integra LS - Lots of Bumps'
-
First off get rid of the 17's they are killing you!!...if you can try a set of slicks...maybe someone you know can let you try a set out...or at least put your stock rims back on that will help you alot!...and your 60fts are terrible...you should be able to get in the 2.1 to 2.2 range...that will help your times alot...just keep practicing!!!...you should be in the low 14's to high 13's on street tires with your setup and with slicks you can count on low to mid 13's
Good Luck!!
------------------
John
B18C1 Powered 95 Civic EX Coupe
H22A Powered 92 Civic VX Hatch(In the works)
88 CRX HF(Coming soon)
-
Those trap speeds look a little low. Have you dyno'd your car yet? Were the gears at 0,0?
------------------
Supercharged GSR Sedan
JRSC 6 psi, AEM Pulley, AEM Cam gears, RSR header, Greddy PE, Field SFC-VTEC, Neuspeed Race, KYB AGX, Racing Hart C2 (3 piece). CF Hood.
-
Well if you are looking to buy a set of slicks the new LENSO Tomslicks are really light(9 Pounds) and cheap...then just get the M&H 22x8x13 slick and you will be set!!
Heres a link for a place that sells the rims www.washingtontire.com/wheels/axis/vpd13.html
Heres a link for the slicks www.extrememotorsports.com/grcat/wheels.htm
------------------
John
B18C1 Powered 95 Civic EX Coupe
H22A Powered 92 Civic VX Hatch(In the works)
88 CRX HF(Coming soon)
[This message has been edited by CivicR (edited April 09, 2001).]
-
i think u need to get ur car dyno'd and a tune up to see whats wrong.
-
I thought my trap speeds looked a little low also, my cam gears are set at -3e +1i I should probably put them back to 0 0 and dyno tune them. and I have my VTEC set at 5500, what do you think I should set it at? What slicks do you guys recommend I run? thanks for all the help!
------------------
'97 Integra JRSC GSR - Lots of Mods
'95 Integra LS - Lots of Bumps'
-
I'd invest in a Quaiffe LSD. If you know how to take apart your transmission, then it would cost you around $ 750. Best thing that you can do for traction.
I also second the idea of ditching the 17"s.
-
Hyper_Racer the Lenso 13inch Tomslick will fit perfectly with no spacers or mods at all...they were made to fit the GSR...my friend has a pair so I can vouch that they do fit...and they are made very well and are very light...definately worth the $$$
------------------
John
B18C1 Powered 95 Civic EX Coupe
H22A Powered 92 Civic VX Hatch(In the works)
88 CRX HF(Coming soon)
-
Cool, thanks for the info, I'm gonna pick a pair up as soon as I get some $$$ together.. also, you said you recommended the M&H 22x8x13 slicks, what about the 22x9x13? since I'm planning on more boost.
------------------
'97 Integra JRSC GSR - Lots of Mods
'95 Integra LS - Lots of Bumps'
-
What in the world was the thought behind those cam gear settings? Try the exact opposite and you will at least be going in the exact direction
-
CivicR: I heard that I need wheel spacers to fit 13" rims on the GSR. Or would those rims fit without them?
------------------
'97 Integra JRSC GSR - Lots of Mods
'95 Integra LS - Lots of Bumps'
-
Actually, I got it mixed up, it was -1e +3i .. but I still smell a small exhaust leak. I'm gonna try running again on friday, this time with my stock 15" rims on front with about 20psi.
------------------
'97 Integra JRSC GSR - Lots of Mods
'95 Integra LS - Lots of Bumps'
