-
well just to let you guys know what i think,
i just got done installing this JR hondata ecu i got from moss motors. i gota say it is AWESOME! the difference between not tunned and tunned(somewhat) is night and day. i can feel more lower end torque, vtec crossover is now ~3K rpm, everytime i hit vtec i can hear my exhuast just PPPPPPUUUFFFFFFFF! i mean not hitting vtec and hitting vtec there is a drastic sound difference-not to mention the power too! you can drive around as long as you dont gas it vtec wont kick it so that you can save on gas. i also noticed that when i am going from idle rpm to max rpm the power after vtec is so much more linear, i feel no more hiccups, no mor bog. i gots to hand it to those poeple at hondata, it a great product but quit expensive [img]frown.gif[/img]
i had a straight through magnaflow exhuast and now i have a mugen twin loop, i am happy with the lower tone the mugen makes but i believe it so much more restrictive than the magnaflow - i think there is a power difference too - i think i actually lost some power there [img]frown.gif[/img] maybe its just me...
my best run was 14.29sec without hondata... gonna go to the track this friday to see if all that money i spent was worth it!
<font color="#a62a2a" size="1">[ June 25, 2003 08:25 PM: Message edited by: solRNY ]</font>
-
hey, shoot me an email on how much the whole setup cost ya and any changes/settings you had to fool with thanks! I figure down the road (when my Cartech FMU takes a crap) I might go Hondata to keep my car running another 100k miles.
-CROM
-
any chance you can send me the hondata map you are using? [email protected] ....
-
I have the maps,, as all dealers can get them from Hondata.
email me [email protected]
RC
-
attn: HoustSi
When you say you have the maps for the JR Hondata setup, does that mean that if we got the base S200B unit, you could burn those same maps that come with the JR Hondata $1300 unit and we could save a boatload of money? If so, that sounds real sweet!
Mark
-
The map does flat out rock! I have been running the one for the b18c5 in my car for about 2.5 weeks now and the thing pulls so damn strong. I like it, i know i will have t hit the dyno soon now and get the overlap completley out of my cams.
-
you mean i coulda save a ton of money! arg! i only bought hondata from moss motor just becuase of the maps.
hey houston, can u hook me up with hondalogger serial code? moss motor wants 200$ for it. hook me up!
-
I dont hack Hondata software. You do have to have the datalogging purchased through a dealer for the code to be unlocked. You can purchase that and get the datalogging. I would reccomend getting ROM Editor, Datalogging, and Pocket Emulator. This way you can tune and make changes yourself.
I have been doing it for a while now and i can say it's much easier to tune than the AEM and has every feature + the AEM does.
-
<BLOCKQUOTE><font size=2 face="Verdana, Helvetica, sans-serif">quote:</font><table border="0" width="90%" bgcolor="#333333" cellspacing="1" cellpadding="0"><tr><td width="100%"><table border="0" width="100%" cellspacing="0" cellpadding="2" bgcolor="#FF9900"><tr><td width="100%" bgcolor="#DDDDDD"><font size=2 face="Verdana, Helvetica, sans-serif">Originally posted by HoustonSi:
I dont hack Hondata software.</font></td></tr></table></td></tr></table></BLOCKQUOTE>
oh i did not mean that literally, i meant i did not want to pay 200$ from moss motors, but would perfer to pay say 175$? 150$? 100$!!! what ever the hookup cost.
-
All dealers will charge you the same amount for the logger feature.
Sorry.
Hondata keeps it that way for a reason.
If a dealer sells it to you cheaper, then they can anwser to Doug.
-
so how much $$$ for a s200 with boost and the base map? I have a p28 ecu but i would need the jumper harness
-
S200 with Boost = $495
440 injectors = $359
injector clips = $24
P28 with built in harness = $425
Obd1 to obd2 harness = $250, but I have saw these for $150 or below.
Not sure if they are sellling just JR map though. Maybe.
-
I could sell the JR map..
I guess since im not a dealer [img]smile.gif[/img]
[email protected]
-
<BLOCKQUOTE><font size=2 face="Verdana, Helvetica, sans-serif">quote:</font><table border="0" width="90%" bgcolor="#333333" cellspacing="1" cellpadding="0"><tr><td width="100%"><table border="0" width="100%" cellspacing="0" cellpadding="2" bgcolor="#FF9900"><tr><td width="100%" bgcolor="#DDDDDD"><font size=2 face="Verdana, Helvetica, sans-serif">Originally posted by BartmanMn-Si:
S200 with Boost = $495
440 injectors = $359
injector clips = $24
P28 with built in harness = $425
Obd1 to obd2 harness = $250, but I have saw these for $150 or below.
Not sure if they are sellling just JR map though. Maybe.</font></td></tr></table></td></tr></table></BLOCKQUOTE>
since i dont need the converted harnness, total from above is 1303$, i paid just about that from moss motors - so i didn't get ripped off [img]smile.gif[/img]
-
all I need is the s200 with boost and the obd2 to obd 1 jumper how much there I have 440's and a p28 is that the right ecu to get??
<font color="#a62a2a" size="1">[ June 26, 2003 05:57 PM: Message edited by: grand600intercooled ]</font>
-
$795.00 plus shipping John...
I have it all on the shelf. Call me about MAP selection.
-
Hey JRcivic Can I send you this p28 so you can do to it whatever needs to be done with it??? let me know thanks
-
Hi HoustonSi, I was wondering if you have received my email reply? I've been getting delivery failure messages when sending you email today.
Thanks,
-
NO, unfortunatley my email server has been down.
They assure it me will be up "soon" ..same thing they told me at 10AM.
-
-
So you would suggest this? how long did it take you to install? Did you have to do anything out of the ordinary to get it to work? Thanks! [img]biggrin.gif[/img]
-
<BLOCKQUOTE><font size=2 face="Verdana, Helvetica, sans-serif">quote:</font><table border="0" width="90%" bgcolor="#333333" cellspacing="1" cellpadding="0"><tr><td width="100%"><table border="0" width="100%" cellspacing="0" cellpadding="2" bgcolor="#FF9900"><tr><td width="100%" bgcolor="#DDDDDD"><font size=2 face="Verdana, Helvetica, sans-serif">Originally posted by OnTheRiseSI:
So you would suggest this? how long did it take you to install? Did you have to do anything out of the ordinary to get it to work? Thanks! [img]biggrin.gif[/img] </font></td></tr></table></td></tr></table></BLOCKQUOTE>
it took me about 2hrs to install, most of it was alot of soldiering injector wires and other nick nacks.
the one thing that the kit does not come with is the "block off plate for the MAP SENSOR" so you have to make ur own plate, i am reusing my plate from my JR MAP MOD kit.
i suggest reading the link,
http://www.hostboard.com/cgi-bin/ult...&f=110&t=11522
