http://gvtec.tripod.com/autometer-pod.jpg
The install was simple and fitment was equal to that of the OEM. Hey, it only took two months to get it through NOPI!
Printable View
http://gvtec.tripod.com/autometer-pod.jpg
The install was simple and fitment was equal to that of the OEM. Hey, it only took two months to get it through NOPI!
GVTEC, thanks for the pic. That thing looks tight!!! http://www.hostboard.com/ubb/biggrin.gif
Hey Gvtec,
Lookin' good! Do you know if they make one of those for a '92-'95 Civic?
BTW, how much did that bezel cost for the Integra? Thanks.
------------------
The Mick
'94 GS-R w/ JRSC
The little engine that CAN!!! [but the car can't! ;o(]
'00 Dark Violet Pearl GS-R coupe
Man that looks REALLY nice! This is something that I would DEFINITELY like to get sine i want to keep gauges away from visible sight of other drivers!
how much was that thing? what size does it fit?
------------------
It take a Nation of Millions to hold Us Back!!!
http://www.bocajuniors.com.ar/escuani.gif
C-SpeedRacing
[This message has been edited by MouhadIb (edited October 08, 2000).]
I bought it for $55 from NOPI, which included my SCCA discount.
I know that one is made for the Civic, but do not know what years.
are those gauges from greddy? They look good Im going to order one soon as I can finish saving for the clutch and stuff.
------------------
95 GSR 4-DR Greddy exhaust and header, AEM CaI, Field Vtec controller, Power slots and metal axxis pads.
Eibach Pro springs, Tokico illuminas, Progress 22mm rear sway bar.
They are SPI; very similar to APEX'i except they are in standard measurment, not metric.
[This message has been edited by Gvtec (edited October 09, 2000).]
Man, wish I had mine http://www.hostboard.com/ubb/frown.gif Still waiting for Summit and I was the first person here to order one way back 2 months ago. DAMN http://www.hostboard.com/ubb/mad.gif
------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, DC 4-2-1 one peice header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, H&R sports and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down and soon to go on the "Juice".
Javin how much you paid for it from Summit?
------------------
It take a Nation of Millions to hold Us Back!!!
http://www.bocajuniors.com.ar/escuani.gif
C-SpeedRacing
[This message has been edited by MouhadIb (edited October 10, 2000).]
Great setup! I can't wait for mine. I should have it by wed. Did you pay a delivery charge on top of the $55.00? Mine was $69.00 delivered.
Thanks for posting the pics.... Looks good. I was afraid the fuel and temp gauge would get hidden from view, but obviously not.
Still waiting on mine from Carparts.com....
Along witht the 4372 Intake temp, and the 22119 triple pod.... Carparts.com sux.
where did you get the gauges? can you change the color of the lighting? Like I said before looks good
nick
------------------
95 GSR 4-DR Greddy exhaust and header, AEM CaI, Field Vtec controller, Power slots and metal axxis pads.
Eibach Pro springs, Tokico illuminas, Progress 22mm rear sway bar.
YEE-HAW!......
Carparts.com finally shipped mine.... Be here Friday!
------------------
95 GSR
JRSC @ 11lbs, NOS (Track), Kamikazee Header, Nakayama Intake, Brospeed Exhuast, Unorthodox Cam Gears, RC 310cc injectors, Bosch (ENDYN modified) fuel pump, STR rail, Hyper R, Moroso catch can, B&M oil cooler, J&S SafeGuard, MSD6BTM, Blaster coil, MSD Cap, ES mounts, ES tranny bushings, ACT 6 puck, Baer 13" Kit, Slotted/Xdrilled rear, Stainless lines, M/T for the track, blah, blah, blah......
*** Motor and JRSC being rebuilt by ENDYN
Stay Tuned!
Nope, $4 shipping + $51 = $55.
Well I guess UPS was delivering yesterday cause I had a surprise waiting for me at work lastnight, my bezel. Now I jsut have to install it. I'll post pics.
------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, DC 4-2-1 one peice header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, H&R sports and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down and soon to go on the "Juice".
Looky everybody http://www.advancedcompositeseng.com/ these people can do just about anything in Carbon fiber as long as they have a good mold so I am gonna send them some a good pics of just my daul guage bezel and see what it will cost to get it done. I'll let you guys know and if it is cheap, I will have a bezel for sale http://www.hostboard.com/ubb/wink.gif
------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, DC 4-2-1 one peice header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, H&R sports and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down and soon to go on the "Juice" and a CF diet.
Best et ==>13.6 @ 103mph w/ 2.3 60ft
Does anybody know what the Autometer part # is, please? Thanks
20011
------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, DC 4-2-1 one peice header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, H&R sports and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down and soon to go on the "Juice" and a CF diet.
Best et ==>13.6 @ 103mph w/ 2.3 60ft