i will be sponsoring a group buy on clutch specialties in the next week. Please let me know if anyone is interested. thanks BRIAN
Printable View
i will be sponsoring a group buy on clutch specialties in the next week. Please let me know if anyone is interested. thanks BRIAN
I might be interested. How much of a discount are we looking at?
I'z B Interested http://www.hostboard.com/ubb/biggrin.gif
------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, DC 4-2-1 one peice header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, H&R sports and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down and soon to go on the "Juice" and a CF diet.
Best et ==>13.6 @ 103mph w/ 2.3 60ft
I am very interested!
------------------
My Mind is Always Racing.
95 DX B18C1
Please give us some pricing. I'm interested in a set up for GSR w/ JRSC although not to harsh for daily commuting. I rarely take my car to the track. Thx.
Me need clutch! Hehehe....
If you can also have some sort of light flywheel groupbuy (i.e. Fidanza), count me in.
Well, i jus ordered my STAGE 2 from BRIAN.....i figured at 300 shipped, that was a pretty good deal in its self....
I think the ACT equivelent is like 400!?
Thanks to LUNDGREN for recomending this guy, Brian was BEYOND helpful, and NICE!
Tony
------------------
96 GSR, JRSC@6psi, Monthly Autocrosser, Weekly Drag Racer, and ALWAYS daily driven! [email protected] in the 1/8th, shootin for 8.5 with some new "goodies"!
http://www.autorage.cc
http://www.etrscca.org
http://www.honda-tech.com
AOL Instant Mess.= KDXTASY
I would like to welcome everyone to my NEW HOME PAGE! http://maxpsigsr.overboost.net
Heres my idea of prices.
B-series street upgrade/ sprung hub, $265+ shipping.
D-series street upgrade/ sprung hub $260+ shipping.
B-series 6 puck/ sprung hub $255+shipping
D-series 6 puck / sprung hub $250+shipping
or full out race clutch non sprung for $250
what do you people think of these prices ? please let me know
gaugeworkz
Make sure put your buy on http://www.groupbuycenter.com/ gaugeworkz email me, I'll get your an account to post it.
------------------
http://www.netbsi-kc.com/integra/
http://www.netbsi-kc.com/aa/
http://www.groupbuycenter.com/
I'd be in for sure, but I don't know if I can wait more than a week or two at the most... Are these prices confirmed, or just pulled out of the air...
------------------
1998' 4dr GSR, 8psi JRSC w/hand ported plenum, Walbro HP fuel pump, valves set to .005i/.006e, MSD BTM, B&M CommandFlo regulator(working it out), stock intake w/resinator cut off at fenderwell for "cool air", Greddy sp exhaust, Tokico Illumina 5-ways, Neuspeed springs(sux!), Skunkworks 22mm rear swaybar, ES motor mounts and front swaybar bushings, Yokohama AVS 205/50/15's, Metal Master brake pads(KVR Carbon Fibre pads sitting on work bench) ,B&M fuel pressure gauge, Autometer sport comp A/F gauge in dimmer location...
YLW 00' ITR #00-1011 with AEM CAI and 143db triple air horns
Honest officer, I had no idea how fast I was going...the speedometer only gos to 150...
Get paid to surf the Web!!! http://www.alladvantage.com/go.asp?refid=TUD-039
I might be into the clutch purchase as well. Something tells me that big purple bottle may accelerate the wear of my factory clutch http://www.hostboard.com/ubb/wink.gif Did that check clear for you ok, Brian?
------------------
Painfully stock 2000 GSR
Brian, how much is a CS stage II for '95 Integra GSR? Regular price is $300 shipped..
how much would group order saving be on this?
Hell yea, the only thing I need to know is what the different types? I need something for the street and for the SC.
thanks
nick
------------------
95 GSR 4-DR Greddy exhaust and header, AEM CaI, Field Vtec controller, Power slots and metal axxis pads.
Eibach Pro springs, Tokico illuminas, Progress 22mm rear sway bar.
redline8k,
Your best bet is to call Brian at www.clutchspecialties.com directly. He is VERY helpful in helping you selecting the right parts for your needs.
From what I've gotten after talking to him, basically, there are three stages. Stage 1 is regular stock upgrade which are for modded up N/A cars. Stage II is a little more holding power than 1st stage, although pedal feels is not significantly heavier than stock. It is mainly for turbo/supercharged vehicles...mostly used for street and some drag...Stage three is more racing, more heavily modified cars..then he also have racing discs (pucks)
which we didn't go into since I'm not a pure racer breed. I'm more a daily commuter so Stage II is perfect for me...I found my niche and stopped there http://www.hostboard.com/ubb/smile.gif
please overlook last post.....
POSTED on GROUPBUYCENTER.com as of thursday night.
[This message has been edited by gaugeworkz (edited October 20, 2000).]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by gaugeworkz:
please overlook last post.....
POSTED on GROUPBUYCENTER.com as of thursday night.
[This message has been edited by gaugeworkz (edited October 20, 2000).]<HR></BLOCKQUOTE>
http://www.groupbuycenter.com/buy.asp?row_id=1503
UP UP UP ^^^^^^
------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, DC 4-2-1 one peice header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, H&R sports and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down and soon to go on the "Juice" and a CF diet.
Best et ==>13.6 @ 103mph w/ 2.3 60ft
I just ordered mine. I talked to Brian at Wicked Performance and he stated two already recieved their clutches and the other two were shipped yesteday. So, who got their clutch?
I got the StageII like everyone else on this board. I really hope this clutch is as good as advertised.
------------------
Mods
yeah, I ordered stage II ... Brian at Clutch Specialties is doing a drop shipping (ship to me directly from CS)...should get it by sometime next week...BTW, I going to install this with a new Type R flywheel...aftermarket flywheel is too expensive for me..
UP UP UP UP
------------------
98 GS-scR w/ 8psi JRSC, Walbro HO fuel pump, AEM cai, DC 4-2-1 one peice header, Thermal Exhaust, Skunk Works cam gears, J&S safeguard, RC 310's, Cartech FMU, Vortech regulator, H&R sports and KYB AGX's, and of course to slow down, KVR X-drill F&R rotors and Carbon Kevlar pads and V1 to signal the slowing down and soon to go on the "Juice" and a CF diet.
Best et ==>13.6 @ 103mph w/ 2.3 60ft
Well, i got my clutch, i know jpcaudill got his...
They use KOYO throwout bearings....i got a FACTORY HONDA bearing to compare it to, and i think ill use the HONDA bearing....
Tony
------------------
96 GSR, JRSC@6psi, Monthly Autocrosser, Weekly Drag Racer, and ALWAYS daily driven! [email protected] in the 1/8th, shootin for 8.5 with some new "goodies"!
http://www.autorage.cc
http://www.etrscca.org
http://www.honda-tech.com
AOL Instant Mess.= KDXTASY
I would like to welcome everyone to my NEW HOME PAGE! http://maxpsigsr.overboost.net
Should see my stage II tomorrow I hope... We'll see how it holds up... I've got some larger injectors on the way too...
------------------
1998' 4dr GSR, 8psi JRSC w/hand ported plenum, Walbro HP fuel pump, valves set to .005i/.006e, MSD BTM, B&M CommandFlo regulator(working it out), stock intake w/resinator cut off at fenderwell for "cool air", Greddy sp exhaust, Tokico Illumina 5-ways, Neuspeed springs(sux!), Skunkworks 22mm rear swaybar, ES motor mounts and front swaybar bushings, Yokohama AVS 205/50/15's, Metal Master brake pads(KVR Carbon Fibre pads sitting on work bench) ,B&M fuel pressure gauge, Autometer sport comp A/F gauge in dimmer location...
YLW 00' ITR #00-1011 with AEM CAI and 143db triple air horns
Honest officer, I had no idea how fast I was going...the speedometer only gos to 150...
Get paid to surf the Web!!! http://www.alladvantage.com/go.asp?refid=TUD-039
up up up up and away
maxpsi gsr,
what's the difference between Honda's and Koyo bearing? (quality wise)
Brian,
Got my CS clutch in yeasterday... Now I just have to find the time to put it in...
------------------
1998' 4dr GSR, 8psi JRSC w/hand ported plenum, Walbro HP fuel pump, valves set to .005i/.006e, MSD BTM, B&M CommandFlo regulator(working it out), stock intake w/resinator cut off at fenderwell for "cool air", Greddy sp exhaust, Tokico Illumina 5-ways, Neuspeed springs(sux!), Skunkworks 22mm rear swaybar, ES motor mounts and front swaybar bushings, Yokohama AVS 205/50/15's, Metal Master brake pads(KVR Carbon Fibre pads sitting on work bench) ,B&M fuel pressure gauge, Autometer sport comp A/F gauge in dimmer location...
YLW 00' ITR #00-1011 with AEM CAI and 143db triple air horns
Honest officer, I had no idea how fast I was going...the speedometer only gos to 150...
Get paid to surf the Web!!! http://www.alladvantage.com/go.asp?refid=TUD-039
[This message has been edited by Zeus (edited November 03, 2000).]
back to the top.....
------------------
Also known as
Wicked Performance.
If you need somethin, just ask, if i can get it, IT WILL BE AT A GREAT PRICE.