Help!

[bseavey]

I've just started put my stove back together yesterday. When I took it completely apart I put each group of screws, nuts etc. in separate zip lock bags. I labeled each bag and noted where it went. It came apart very easily and I thought that I'll remember where everything goes, well that turning out not to be the case. I've spent the past two days trying to put Humpty Dumpty back together. But here is my question-inside the oven compartment on the back wall there is the opening for the rear damper, then above that is a holder for the temperature sensor for the thermostat, then above that there are two holes. I can't remember what went in these two holes. Can someone look in there oven and see if you have what I'm talking about. I have a model 90c. I've looked over my zip lock bags a thousand times and I can't figure it out. It's very frustrating. Thanks for your help.

[lowracer]

You'll use those two holes when you put the back of the range back on. There are two REALLY long bolts that go through the back into those holes.

When I disassembled my oven I took a digital photo of *everything*.

[Todd W. White]

Bill - did you get the Service Manual for your "C"? It mentions those two bolts... (hint, hint).

[bseavey]

I never explain myself very well, I was speaking of the inside of the oven on the back wall. The two holes only go through the inside oven wall & not all the way through to the back of the stove. Any ideas? I just can't remember what was there.

[annnt]

If the holes you are talking about are what I'm thinking about on my stove - a BZ, they are for the two clips that hold the diastat of the thermostat in place.
Ann

[bseavey]

That's it. In fact I got some parts from TOAC and they sent me two clips that I didn't order. I emailed them with my question about the holes in the oven compartment and asked what were the clips for. Talk about killing two birds with one stone. Things seem so much easier when you know the answers. Thanks for your input. Happy Holidays