Results 1 to 4 of 4

Thread: repair - suffolk county ny?

  1. #1
    Inactive Member issy's Avatar
    Join Date
    November 18th, 2006
    Posts
    2
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I recently had the propane company move my propane line, which resulted in the chambers c being red tagged because of the pressure test. The family has had the stove since it was new-- and had it recond in the early 80s. I've been using the yellow pages and working some contacts and come up with no one willing to find/fix the leak, which must be small because there is no propane odor. I'd rather not attack myself because of paranoia. Any ideas?
    Linda

  2. #2
    Inactive Member Pokey Roberts's Avatar
    Join Date
    May 6th, 2006
    Posts
    91
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Was the gas to the stove off while they were doing
    the test. If the gas was on to the stove there
    is no way to pass a pressure test because of the
    pilot light. Talk to the propane company and ask
    them who did the test how it was performed and if
    they took into the account that the pilot lights
    would let the pressure leak.
    If that was not the case is the leak between the
    tank and the stove or somewhere else in the system.
    The easiest and safest way to find a leak is with
    the soapy water solution. See post on intermittent
    leak.
    Pokey

  3. #3
    Inactive Member issy's Avatar
    Join Date
    November 18th, 2006
    Posts
    2
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Thanks for the reply. The pilots were off-- and I am an honest person and told the propane guy that when asked... now I'm eating microwaved food... The system checked out up until the shut-off valve at the stove-- so the leak is somewhere in the stove. The guys working were anxious to get out of here-- so they just capped the tank off and left. I need to get them back to turn on the gas so I can go over the fittings with soapy water. There are a finite number of fittings, so I am guessing I can find the leak-- I just feel anxious about doing any repairs myself. And as of right now, if the issue is in the valves I don't have the materials to repair.

  4. #4
    Inactive Member treatmaker's Avatar
    Join Date
    November 11th, 2005
    Posts
    305
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Issy,

    I have a chambers repair man in Queens, NY. He was at my home last nite making sure my "new chambers" wasn't leaking gas, etc. Unfortunately he doesn't cover Suffolk County. I asked him after I saw your post. However, he does have parts and might be able to give you advice over the phone.

    His name is Paul Farella of Central Range service Corp. The numbers are 718-776-4800 and 516-794-0288. I hope this helps.

    Treatmaker

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •