Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: ClutchMaster

  1. #1
    Inactive Member Civic TSI's Avatar
    Join Date
    February 3rd, 2000
    Posts
    181
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Well, after reading some previous post about ClutchMaster about which clutch is better, I would say to stay away from ClutchMaster. Even though I haven't remove my tranny yet, I'm pretty sure that a spring just went off the clutch at the track this week-end. This was only the fourth time that I went to the track with it, with no more than 15 passes total, with about 5000 miles of non-abusive driving. With only 220hp at the wheels, I would have expect that a stage IV would be a lot stronger than that.

    So here it goes again, which clutch is better ? I've heard good things about RPS but they don't make their TurboClutch Carbon for my car frown ACT, I don't think anyone I've tried it around here so I don't know. Others ???

    ------------------
    To 24 PSI, and beyond !
    HS Le Club

    [This message has been edited by Civic TSI (edited June 12, 2000).]

  2. #2
    Inactive Member Four Door GSR's Avatar
    Join Date
    August 3rd, 1999
    Posts
    188
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Sorry to hear about your clutch. I have a stage II thats been in my car for over 70K now with minimal problems. The pedal is starting to sag a little, but it still grabs like a claw.

    I think the concensous around any board you go to is that ACT is the way to go. I think if my setup blew up tommorrow I would go this route.

    ------------------
    Supercharged GSR Sedan
    JRSC 6 psi,AEM CAI, AEM Pulley, AEM Cam gears, RSR header, Greddy PE, Field SFC-VTEC, Neuspeed Race, KYB AGX, Racing Hart C2 (3 piece).

    Objects in mirror are losing.

  3. #3
    Inactive Member plumvtec's Avatar
    Join Date
    March 12th, 1999
    Posts
    109
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Anyone have any insight to Centerforce? Good bad? I can get their Dual friction at a decent price.

    ------------------
    '96 JR6 GSR Sedan (black currant pearl)
    '93 Honda CBR 900RR
    -------------------------

  4. #4
    Inactive Member redline's Avatar
    Join Date
    January 19th, 2000
    Posts
    280
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    My centreforce last three months with boost!!

    k

  5. #5
    Inactive Member BurntGSR's Avatar
    Join Date
    March 26th, 2000
    Posts
    393
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Hmm, I had a stage 3 kit that rocked. Maybe the install wasn't done right?

  6. #6
    Lip
    Guest Lip's Avatar

    Post

    i was thinking the same thing. i'm abusing mine now (stage 4) and besides a bit of chatter)it has a stock left leg and grabs with aggression. this is the first time i've ever had a problem shifting...ever. the clutch is grabbing before i can get my damn arm to react. i mis shifted 5 times last saturday at the event...and it was no ones fault but my own. Stock ITR clutch setup was actually pretty good...but i didn't know what i was missing til the swap

    ------------------
    Lip

    94' GSR-R?, 13.20 @ 102.83mph. 12's in da Spring or bust...i can smell it now!!

  7. #7
    Inactive Member Civic TSI's Avatar
    Join Date
    February 3rd, 2000
    Posts
    181
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    My clutch failure maybe due to my flywheel since it didn't let the clutch slip a bit. It was very hard not to spin the tires from a dead stop, so the springs got all the stress.


    Centerforce sucks. Lasted 2 months before it has started to slip. Mis-install, I don't think so, it's kind of hard to do. ACT seems really good, I may get a HDPP with a SS disc. Anyone heard anything about Exedy ?

    ------------------
    To 24 PSI, and beyond !
    HS Le Club

  8. #8
    Inactive Member SteveW's Avatar
    Join Date
    February 28th, 1999
    Posts
    300
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Clutch Specialties 714-525-4272

    i love mine and it has dealt with abusive street driving, drag racing and auto-x.
    upgraded pressure plate and hybrid full face.

    steve

  9. #9
    Inactive Member BurntGSR's Avatar
    Join Date
    March 26th, 2000
    Posts
    393
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I've had the basic same experience Lip had. Soft pedal, STRONG bite. I wonder if there is a quality control issue or a conflict working with certain parts that you guys might be installing that differs from what we have. Its odd that some people have excellent results and then others horror stories. Just plain weird.

  10. #10
    Inactive Member SenekaGSR's Avatar
    Join Date
    October 7th, 1999
    Posts
    96
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    My car is in the shop right now gettin a clutch specialties clutch put in. i payed 270 for the clutch and ill tell u tommorow my first impressions. also in a week or 2 ill have the turbo in and tell u how it handles that.

    ------------------
    94gsr, Drag3 and yellow paint goin on in april

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •